Limestone. Limestone is purchased by the Committee for the maintenance of the roads and car park and is NOT available for Members’ personal use.
Limestone. Physical Properties Design Basis CaCO3, dry wt.% 95 minimum CaCO3 (Available), dry wt.% 95 minimum MgCO3, dry wt.% 2 maximum Quartz (crystalline silica), dry wt.% 1.5% maximum Inerts, dry wt.% 5 maximum Moisture, wt.% 7 maximum Particle Size ¾” x 0 with no more than 25% < 6 mesh, and no more than 10% < 100 mesh Bulk Density, lb/ft3 80 – 110 Reactivity per EPRI Method B7— Limestone Dissolution Rate and Magnesium Availability TBD Work Index, kWh/short ton 13 maximum 1 Available CaCO3 is the wt.% of CaCO3 that is not tied up in dolomite, defined as (lb of available CaCO3/lb of dry limestone) x 100%. 2 Maximum of (MgCO3 + Quartz + Inerts) is 5 dry wt.%. Performance Coal; Xxxxxxxxxxx Xxxxxx, Xxxxxxxxxx #0 Ultimate Analysis as Received Parameter Performance Coal Design Performance Coal Design Range Coal Minimum Maximum Ash, wt.% 7.73 6.80 8.63 Moisture, wt.% 5.71 5.20 7.20 Carbon, wt.% 72.67 71.97 74.60 Hydrogen, wt.% 5.05 4.60 5.17 Oxygen, wt.% 5.07 4.06 5.77 Nitrogen, wt.% 1.38 1.27 1.54 Sulfur, wt.% 2.29 1.72 * Chlorine, wt.% 0.10 0.08 0.13 Total, wt.% 100.00 — — Xxxxxxxx Grindability 55 52 59 Higher heating value 13,100 12,956 13,255 * Based on 4 lb SO2/MMBtu and based on 100% of the sulfur converting to SO2, the maximum sulfur is: S% = 2 (lb S/MMBtu) × HHV (Btu/lb) ÷ 10,000. TO THE FACILITY LEASE For example at a higher heating value (HHV) of 13,255, the maximum sulfur is 2 × 13,255 ÷ 10,000 = 2.65 % Proximate Analysis as Received Parameter Performance Design Coal Higher heating value, Btu/lb 13,100 Ash, wt.% 7.73 Volatiles, wt.% 35.73 Fixed carbon, wt.% 50.84 Sulfur, wt.% 2.29 Moisture, wt.% 5.71 Design Coal Size Distribution Size Individual% Cumulative% >2.0” 8.3 8.3 2.0” x 1.5” 10.4 18.7 1.5” x 1.0” 14.6 33.3 1.0” x 0.5” 25.5 58.8 0.5” x 0.25” 11.5 70.3 <0.25” 29.7 100.0 Ash Fusion Temperatures Reducing Design Coal (°F) Minimum (°F) Maximum (°F) Initial Deformation 2,128 2,075 ³ 2,186 Softening 2,214 2,139 ³ 2,299 Hemispherical 2,216 2,128 ³ 2,316 Fluid 2,355 2,265 ³ 2,459 Oxidizing Design Coal (°F) Minimum (°F) Maximum (°F) Initial Deformation 2,404 2,315 ³ 2,491 Softening 2,465 2,395 ³ 2,539 Hemispherical 2,508 2,456 ³ 2,585 Fluid 2,533 2,489 => 2,617 TO THE FACILITY LEASE Ash Analysis Mean (%) Minimum (%) Maximum (%) SiO2 43.17 40.37 47.07 Al2O3 21.95 21.02 23.41 Fe2O3 21.17 15.05 22.84 CaO 5.18 4.27 5.93 MgO 0.90 0.82 1.06 Na2O 1.06 0.69 1.18 K2O 1.45 1.25 1.63 TiO2 0.93 0.78 1.02 P2O5 0.59 0.22 0.65 SrO — — — Mn3O4 — — — SO3 4.28 2.78 5.80 BaO — — —...
Limestone. (i) On March 15, 2000, Limestone shall enter into the Note Purchase Agreement. On the Closing Date, Limestone shall enter into the Indenture, and shall issue the Initial Notes under the Indenture to the Initial Purchaser pursuant to the terms of the Note Purchase Agreement against payment of the purchase price therefor of $1,000,000,000 by the Initial Purchaser to Limestone.
Limestone. Submit supplier's certification that the limestone being supplied conforms to these Specifications.
Limestone. A. Ground limestone for adjustment of loam borrow pH shall contain not less than 85 percent of total carbonates and shall be ground to such fineness that 40 percent will pass through 100 mesh sieve and 95 percent will pass through a 20 mesh sieve. Contractor shall be aware of loam borrow pH and the amount of lime needed to adjust pH to specification in accordance with testing lab recommendations.
Limestone. Owner will arrange the delivery and unloading at the --------- Facility Site of Acceptable Limestone as specified in Exhibit E.
Limestone. Set cut face of limestone blocks directly on prepared levelling course base. Ensure blocks are approximately level and plumb and with top at required elevation. Butt split faces tightly together where indicated.
Limestone. The limestone zone is having 150m length, 75m width and proved upto 515m RL by drilled borehole to a thickness of about 40m on an average, below the topsoil. The limestone is occurring with murrum/xxxxxx Limestone along the contact zone of limestone & dolomite. The colour of the limestone is gray. It is fine to medium grained in texture and medium hard in nature. The limestone is having CaO content between 35% to 54.49%.
Limestone. To furnish all limestone used on the farm, together with all costs of hauling and spreading. If the Lessee hauls and/or spreads the limestone, furnished by the Lessor, the Lessor shall pay the Lessee the customary rate per ton for such work done. The rates for such work shall be mutually agreed upon before the work is done. The Lessor agrees to apply limestone in an amount sufficient to bring the pH to a pH level.
