Common use of Fire Alarm System Clause in Contracts

Fire Alarm System. The Contractor or Electrician shall furnish electrical drawings to Management Office prior to the commencement of construction. These drawings shall include Fire Alarm System (which should be a separate drawing), Riser Diagram and Sequence of Events. The Contractor is responsible for coordinating all work with Management Office. The Building’s Fire Panel contractor, ▇▇▇▇▇▇’▇, shall make the final tie-in of all fire devices to the panel on the respective floor(s) at the Contractor’s expense. It is the responsibility of the Contractor to ensure that any devices installed be Building Standard and further, that any strobes/horns moved remain on the same circuit to ensure that the system remains in sync. In the event that the moving of horns/strobes causes the system to be out of sync, it will be the responsibility of the Contractor, as its sole expense, to correct the problem. A work permit must be obtained prior to any work on the fire alarm system from the Town of Watertown. The engineer who designed the mechanical systems shall sign and seal the riser plan and certify, in writing, the completed system to the Town of Watertown prior to the final sign off of the work permit and/or issuance of the Certificate of Occupancy. Also, the electrical contractor shall complete an A433R Form which certifies the correct installation of the fire alarm devices. The signed and sealed plan and A433R Form must be given to the ▇▇▇▇ Management Office to complete the fire alarm filing and sign-off.