Common use of Final Meeting Clause in Contracts

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential products.  Final invoicing and release of retention. • Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The (meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential products.  Final invoicing and release of retention. • Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o • The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o • The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  • Disposition of any state-owned equipment.  • Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  • The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  • Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  • “Surviving” Agreement provisions such as repayment provisions and confidential products.  • Final invoicing and release of retention. • Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  ▪ Disposition of any state-owned equipment.  ▪ Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  ▪ The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  ▪ Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  ▪ “Surviving” Agreement provisions such as repayment provisions and confidential products.  ▪ Final invoicing and release of retention. • Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  • Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential products.  Final invoicing and release of retention. • Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient Contractor shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendationsproducts. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient Contractor and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended identified next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement productsdeliverables).  Need to document the RecipientContractor’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential productsdeliverables.  Final invoicing and release of retention. •  Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient Contractor and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: •  Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o  The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o  The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:   Disposition of any state-owned equipment.   Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.   The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).   Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.   “Surviving” Agreement provisions such as repayment provisions and confidential products.   Final invoicing and release of retention. •  Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient Contractor shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient Contractor and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement productsdeliverables).  Need to document the RecipientContractor’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential productsdeliverables.  Final invoicing and release of retention. •  Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient Contractor and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with the approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o • The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o • The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  • Disposition of any state-owned equipment.  • Need to file a Uniform Commercial Code Financing Statement (Form UCC-1UCC- 1) regarding the Energy Commission’s interest in patented technology.  • The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  • Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  • “Surviving” Agreement provisions such as repayment provisions and confidential products.  • Final invoicing and release of retention. • Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The (meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential products.  Final invoicing and release of retention. • o Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: •  Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:   Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential products.  Final invoicing and release of retention. •  Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient Contractor shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient Contractor and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical UtechnicalU portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative UadministrativeU portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement productsdeliverables).  Need to document the RecipientContractor’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential productsdeliverables.  Final invoicing and release of retention. •  Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient Contractor and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  Disposition of any state-owned equipment, if applicable.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential products.  Final invoicing and release of retention. • Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.

Final Meeting. The goal of this subtask is to complete the closeout of this Agreement. The Recipient shall: • Meet with Energy Commission staff to present project findings, conclusions, and recommendations. The final meeting must be completed during the closeout of this Agreement. This meeting will be attended by the Recipient and CAM, at a minimum. The meeting may occur in person or by electronic conferencing (e.g., WebEx), with approval of the CAM. The technical and administrative aspects of Agreement closeout will be discussed at the meeting, which may be divided into two separate meetings at the CAM’s discretion. o The technical portion of the meeting will involve the presentation of findings, conclusions, and recommended next steps (if any) for the Agreement. The CAM will determine the appropriate meeting participants. o The administrative portion of the meeting will involve a discussion with the CAM and the CAO of the following Agreement closeout items:  Disposition of any state-owned equipment.  Need to file a Uniform Commercial Code Financing Statement (Form UCC-1) regarding the Energy Commission’s interest in patented technology.  The Energy Commission’s request for specific “generated” data (not already provided in Agreement products).  Need to document the Recipient’s disclosure of “subject inventions” developed under the Agreement.  “Surviving” Agreement provisions such as repayment provisions and confidential products.  Final invoicing and release of retention. • Prepare a Final Meeting Agreement Summary that documents any agreement made between the Recipient and Commission staff during the meeting.