Feeder Pillars Sample Clauses

Feeder Pillars. Feeder Pillars including small service types are only to be used with the prior approval of the Network lighting Manager. Feeder pillars shall be manufactured with 2.5mm Stainless Steel, grade 3CR12 or similar approved and have a brushed finish complete with bolt on bitumen root. The doors shall have embedded durable hazard warning sign and earth fly lead, the backboard shall be treated 12mm exterior ply. The required durability is no maintenance other than a clean down before Adoption using the cleaning chemicals specified by the manufacturer. Every feeder pillar shall be vandal proof, have a minimum ingress protection rating of IP54 and IP65 for the door gasket complete with an inbuilt ‘Secret’ ventilation system as standard. The door hinges shall be lube for life maintenance free Stainless steel and Phosphor Bronze. The door locks shall be quarter turn, captive, heavy duty stainless steel with anti vandal socket screws and security plugs as standard. Each feeder pillar shall have an A4 document pocket fitted as standard. All ducts entering the feeder pillar base shall be suitably sealed with a waterproof material, a layer of sand is then to be laid into the base, care shall be taken not to block ventilation grills. Where excessive condensation within a feeder pillar shell is found the Developer with the approval of the Network Lighting Manager is to take all necessary measures to alleviate the problem. Any damages caused by condensation shall be made good at the Developers cost. The feeder pillar shall be suitably sized to accommodate the Local Electricity Supply Company cutout, isolator and Authority switchgear. All feeder pillars are to be erected in accordance with the Manufacturers Specification a one Metre wide concrete “mowing strip” shall be provided around feeder pillars installed in a verge. One number spare key shall be provided to the Network Lighting Manager. Separate feeder pillars are to be provided for Main Estate/Spine Roads on Residential Sites. Each Developer shall provide their own feeder pillar unless otherwise agreed to by the Network Lighting Manager. The minimum acceptable dimensions are: - Height 1030mm Internal Width 550mm Working Depth 220mm
AutoNDA by SimpleDocs
Feeder Pillars. Units 40 The units of measurement shall be: (i) invoiced costs of electrical components and materials sum. Measurement 41 The measurement of invoiced costs of electrical components and material shall be the cost of the supply, storage and delivery of component and materials. A percentage adjustment to the invoiced cost of electrical components and materials shall also be measured and the applicable adjustment item shall be deemed to be Item 650003002 Percentage adjustment to be applied to the Basic cost of materials in accordance with Section 2 – Materials of Schedule of Dayworks Carried Out Incidental to Contract Work, The percentage adjustment shall include for: (a) ordering and taking delivery; (b) unloading, storing and protecting; (c) double handling; (d) waste; (e) discounts;

Related to Feeder Pillars

  • Feeder The fiber optic cable (lit or unlit) or metallic portion of a Loop between a serving End Office and a remote terminal or feeder/distribution interface.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Two-Way Interconnection Trunks 2.4.1 Where the Parties have agreed to use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and ICG, ICG shall order from Verizon, and Verizon shall provide, the Two-Way Interconnection Trunks, and the Entrance Facility on which such Trunks will ride, and transport and multiplexing, in accordance with the rates, terms and conditions set forth in this Agreement and Verizon’s applicable Tariffs.

  • Configuration Management The Contractor shall maintain a configuration management program, which shall provide for the administrative and functional systems necessary for configuration identification, control, status accounting and reporting, to ensure configuration identity with the UCEU and associated cables produced by the Contractor. The Contractor shall maintain a Contractor approved Configuration Management Plan that complies with ANSI/EIA-649 2011. Notwithstanding ANSI/EIA-649 2011, the Contractor’s configuration management program shall comply with the VLS Configuration Management Plans, TL130-AD-PLN-010-VLS, and shall comply with the following:

  • One-Way Interconnection Trunks 2.3.1 Where the Parties use One-Way Interconnection Trunks for the delivery of traffic from CBB to Verizon, CBB, at CBB’s own expense, shall:

  • Infrastructure (a) The Borrower has and will maintain a sufficient infrastructure to conduct its business as presently conducted and as contemplated to be conducted following its execution of this Agreement.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CBB chooses to subtend a Verizon access Tandem, CBB’s NPA/NXX must be assigned by CBB to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG.

  • Dark Fiber Loop 2.8.4.1 Dark Fiber Loop is an unused optical transmission facility, without attached signal regeneration, multiplexing, aggregation or other electronics, from the demarcation point at an End User’s premises to the End User’s serving wire center. Dark Fiber Loops may be strands of optical fiber existing in aerial or underground structure. BellSouth will not provide line terminating elements, regeneration or other electronics necessary for AFN to utilize Dark Fiber Loops.

  • Dark Fiber Transport Dark Fiber Transport is defined as Dedicated Transport that consists of unactivated optical interoffice transmission facilities without attached signal regeneration, multiplexing, aggregation or other electronics. Except as set forth in Section 6.9.1 below, BellSouth shall not be required to provide access to Dark Fiber Transport Entrance Facilities pursuant to this Agreement.

  • Interconnection Customer (1) Interconnection Customer shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: None

Time is Money Join Law Insider Premium to draft better contracts faster.