Equipment Care. Customer agrees to take proper care of the equipment, including, but not limited to voice-service and internet equipment. All equipment should be stored at room temperature, kept away from any source of moisture, and be connected to a dedicated power source. Tampering, modifying, or changing any equipment or cabling installed or maintained by IdeaTek is dangerous and could result in injury or worse. Tampering, modifying, or changing any equipment or cabling installed or maintained by IdeaTek IS DANGEROUS and may result in service outages, including outages of emergency 911 service. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN REDUCED BATTERY LIFE / ENDURANCE AND MAY CAUSE SERVICE OUTAGES, INCLUDING OUTAGES OF EMERGENCY 911 SERVICE. All IdeaTek Equipment provided to Customer by IdeaTek or its agent will remain the property of IdeaTek unless otherwise agreed upon in writing.
Equipment Care. 1. All equipment will be delivered clean and ready to use.
Equipment Care. Please treat the equipment with care. All equipment is etched with a number/letter corresponding to our inventory list. Failure to return all pieces of equipment in good condition will incur in a replacement charge. Equipment Lending Agreement By way of my signature below, I, , take full responsibility for the equipment that I am checking out. (Print name) □ I agree to pay any fines or replacement costs, per schedules listed below, should the equipment be lost, stolen, or damaged while in my care. Damage to be determined by the library CEO or designate. □ I agree to indemnify the Town of Cochrane from any liability whatsoever and understand that the inherent risks associated with using this equipment. □ I confirm that the equipment is in good condition at the time of check-out. I agree to and will adhere to the Equipment Lending Policy on the reverse side of this form. □ I understand that a $5.00 per item, per day, overdue fine will be charged if the equipment is returned after the due date. Maximum fine of $25.00 per item. (Ex. of maximum overdue fine: Skis @ $25.00 + Boots @ $25.00 + Poles @ $25.00 = total maximum overdue fine $75.00.) □ I understand that accrued fines will not be waived by library staff for any reason. If the equipment is more than 7 days (1 week) overdue, it will be considered lost and I understand that I will be responsible for the full replacement cost up to $550 for the equipment.
Equipment Care. The City requires proper maintenance and care of all of its Theater equipment, including, but not limited to: stage curtains, cables, fire curtains, sound board, projection screens, auditorium seats and carpeting. The inappropriate use of tapes, adhesives, fasteners, or cleaning compounds on equipment is considered damaging. As such, in the event City property is destroyed, LCT is responsible for repairing or replacing said property.
Equipment Care. I will store the Alcohol-monitoring device in a protective case, or keep it protected at all times when not in use.
Equipment Care. The Theatre Department expects efforts to be taken to properly care for (and thus minimize accidental damage to) equipment, especially with regard to; stage curtains, cables, lighting fixtures, projectors, projection screens, microphones, communication headsets, furniture, props, flats, platforms, auditorium seats and carpeting, etc. The inappropriate use of tapes, adhesives, fasteners, or cleaning compounds on equipment will be considered damaging. For example; safety pins are not to xxxxxx curtains; tapes that are difficult to remove or that leave a sticky residue (such as clear tape, duct tape, or masking tape) are not to be used. In the event that any Theatre Department property is damaged or destroyed, the producing party is responsible for repairing or replacing said Theatre Department property.
Equipment Care. TCPC provides the Customer with Customer Premise Equipment to assure compatibility of its Network and Services and Customer and must not in any way interfere, alter or modify the Customer Premises Equipment or any embedded software supplied as part of the Customer Premises Equipment nor allow anyone (other than an authorised TCPC representative) to do so. TCPC may provide the Customers with Customer Premise Equipment of varying capability based on the initial Services selected by the Customer in the Application Form. The Customer acknowledges and agrees that the Customer Premise Equipment shall at all times belong to, and remain the property of, TCPC throughout the duration of this Agreement and that upon termination of this agreement TCPC shall recover from the Customer’s premises all of the said Customer Premises Equipment. The Customer agrees to be fully responsible for good care of the Customer Premise Equipment during the term of this Agreement and to immediately notify and cooperate for the uninstallation and recovery of the equipment by an authorised TCPC agent upon the termination of this Agreement as provided herein, including allowing TCPC access, without delay, to the Customer Site to uninstall and recover the equipment. The Customer is responsible for the care and safety of the Customer Premises Equipment and must not add to, modify, reverse engineer, decompile or in any way interfere with the Customer Premises Equipment or any embedded software supplied as part of the Customer Premises Equipment nor allow anyone (other than an authorised TCPC representative) to do so. Any Customer Equipment connected to the Customer Premises Equipment or otherwise used to access the Services must be technically compatible with the Customer Premises Equipment and the Services and shall be connected and used in accordance with such reasonable instructions, safety and security procedures as may be advised by TCPC at the time of installation. Save where title to the Customer Premises Equipment has passed to the Customer following the payment to TCPC by the Customer of any monies payable for the purchase of the Customer Premises Equipment, the Customer shall be liable to TCPC for any loss of or damage to the Customer Premises Equipment, except where such loss or damage is due to fair wear and tear or is caused by TCPC, or anyone acting on TCPC’s instructions. The Customer recognises that no right, title or interest in the software contained in the Customer Premises...
Equipment Care. The Equipment furnished hereunder by the Hauler shall remain the property of the Hauler. However, Customer acknowledges that upon delivery Customer assumes all care, custody and control of the Equipment while at the Customer’s location and Customer accepts responsibility for any loss or damage to the Equipment (except for normal wear and tear or for loss or damage resulting from Xxxxxx’s handling of the Equipment). Customer agrees not to overload (by height, weight or volume) or move or alter the Equipment and shall use the Equipment only for its proper and intended purpose of waste material disposal.
Equipment Care. The Licensee shall exercise reasonable care in the use of facilities, equipment, and supplies and return the same in good condition when the Agreement ends. The Licensee shall not be liable for normal wear and tear or damage beyond its control. Upon taking delivery of the Licensor-Furnished property the Licensee assumes the risk and responsibility for equipment loss or damage, except--
Equipment Care
