Common use of Environmental Management Clause in Contracts

Environmental Management. and Sustainability The Contractor shall perform work under this contract consistent with the following Environmental Management System (EMS) goals and policy. Goals: • Reduce purchase and use of toxic and hazardous materials; • Expand purchase of green products and services; increase recycling; • Reduce energy and water use; • Increase use of alternative fuels and renewable energy; • Integrate green building concepts in major renovations and new construction; • Prevent pollution at the source; and • Continual improvement. Policy: • Protect public health and the environment by being an environmentally responsible member of the community; • Preserve our natural, historic and cultural resources; • Conserve natural resources by reducing what we discard, reusing items, and recycling materials, which includes purchasing products made from recycled materials; • Integrate sound environmental practices into all our operations and business decisions; Integrate environmental protection requirements and pollution prevention initiatives into the early planning, design and procurement of facilities, equipment and material, as well as the Spec Item Title Description planning and implementation of military training activities; • Prevent or minimize pollution at its source as we seek out ways to eliminate or further minimize use of hazardous materials and generation of hazardous waste; • Maintain a sound partnership with regulatory agencies to sustain our compliance with existing and new environmental laws and regulations; • Enhance our program as we develop and implement an Environmental Management System; and • Adhere to this policy, remind one another to do so, and ensure that our entire community knows this is our policy by our actions as well as our words. The Contractor shall maintain monitoring and measurement information to address the EMS goals and policy and provide the EMS Goals and Policy Measurement Information to the KO when requested. In the event an EMS nonconformance or environmental noncompliance associated with the contracted services, tasks, or actions occurs, the Contractor shall take corrective and/or preventative actions, assume legal and financial liability for the noncompliance and take corrective action immediately to remedy the noncompliance. The Contractor shall ensure that its employees are aware of their roles and responsibilities under the EMS and how these EMS roles and responsibilities affect work performed under the contract.

Environmental Management. and Sustainability The Contractor shall perform work under this contract consistent with the following Environmental Management System (EMS) goals and policy. Goals: • Reduce purchase and use of toxic and hazardous materials; • Expand purchase of green products and services; increase recycling; • Reduce energy and water use; • Increase use of alternative fuels and renewable energy; • Integrate green building concepts in major renovations and new construction; • Prevent pollution at the source; and • Continual improvement. Policy: • Protect public health and the environment by being an Spec Item Title Description environmentally responsible member of the community; • Preserve our natural, historic historic, and cultural resources; • Conserve natural resources by reducing what we discard, reusing items, and recycling materials, which includes purchasing products made from recycled materials; • Integrate sound environmental practices into all our operations and business decisions; Integrate environmental protection requirements and pollution prevention initiatives into the early planning, design and procurement of facilities, equipment and material, as well as the Spec Item Title Description planning and implementation of military training activities; • Prevent or minimize pollution at its source as we seek out ways to eliminate or further minimize use of hazardous materials and generation of hazardous waste; • Maintain a sound partnership with regulatory agencies to sustain our compliance with existing and new environmental laws and regulations; • Enhance our program as we develop and implement an Environmental Management System; and • Adhere to this policy, remind one another to do so, and ensure that our entire community knows this is our policy by our actions as well as our words. The Contractor shall maintain monitoring and measurement information to address the EMS goals and policy and provide the EMS Goals and Policy Measurement Information to the KO when requested. In the event an EMS nonconformance or environmental noncompliance associated with the contracted services, tasks, or actions occurs, the Contractor shall take corrective and/or preventative actions, assume legal and financial liability for the noncompliance noncompliance, and take corrective action immediately to remedy the noncompliance. The Contractor shall ensure that its employees are aware of their roles and responsibilities under the EMS and how these EMS roles and responsibilities affect work performed under the contract. 2.10.1 Environmental Protection The Contractor shall comply with all applicable Federal, state, local laws, regulations, executive orders, and with base-wide instructions, standards, and permit requirements. All environmental protection matters shall be coordinated with the KO. Inspection of any of the facilities operated by the Contractor may be accomplished by the Installation Environmental Protection Coordinator, or authorized officials on a no-notice basis during Government regular working hours. The Contractor shall comply with the instructions of the cognizant Navy Medical Department with respect to avoidance of conditions which create a nuisance or which may be hazardous to the health of military or civilian personnel. The Contractor is responsible for ensuring that its employees receive applicable environmental, occupational, health, and safety training and are kept up to date on regulatory required specific training for the type of work to be conducted onsite. All on-site Contractor personnel, and their subcontractor personnel, performing tasks that have the potential to cause a significant environmental impact shall be competent on the basis of appropriate education, training, or experience.

Environmental Management. and Sustainability The Contractor shall perform work under this contract consistent with the following Environmental Management System (EMS) goals and policy. Goals: •  Reduce purchase and use of toxic and hazardous materials; •  Expand purchase of green products and services; increase recycling; •  Reduce energy and water use; •  Increase use of alternative fuels and renewable energy; •  Integrate green building concepts in major renovations and new construction; •  Prevent pollution at the source; and • Spec Item Title  Continual improvement. Policy: •  Protect public health and the environment by being an environmentally responsible member of the community; •  Preserve our natural, historic and cultural resources; •  Conserve natural resources by reducing what we discard, reusing items, and recycling materials, which includes purchasing products made from recycled materials; •  Integrate sound environmental practices into all our operations and business decisions; Integrate environmental protection requirements and pollution prevention initiatives into the early planning, design and procurement of facilities, equipment and material, as well as the Spec Item Title Description planning and implementation of military training activities; •  Prevent or minimize pollution at its source as we seek out ways to eliminate or further minimize use of hazardous materials and generation of hazardous waste; •  Maintain a sound partnership with regulatory agencies to sustain our compliance with existing and new environmental laws and regulations; •  Enhance our program as we develop and implement an Environmental Management System; and •  Adhere to this policy, remind one another to do so, and ensure that our entire community knows this is our policy by our actions as well as our words. The Contractor shall maintain monitoring and measurement information to address the EMS goals and policy and provide the EMS Goals and Policy Measurement Information to the KO when requested. In the event an EMS nonconformance or environmental noncompliance associated with the contracted services, tasks, or actions occurs, the Contractor shall take corrective and/or preventative actions, assume legal and financial liability for the noncompliance and take corrective action immediately to remedy the noncompliance. The Contractor shall ensure that its employees are aware of their roles and responsibilities under the EMS and how these EMS roles and responsibilities affect work performed under the contract. 2.10.1 Energy Management Program N/A 2.10.1.1 Water Conservation Plan N/A

Environmental Management. and Sustainability The Contractor shall perform work under this contract consistent with the following Environmental Management System (EMS) goals and policy. Goals: •  Reduce purchase and use of toxic and hazardous materials; •  Expand purchase of green products and services; increase recycling; •  Reduce energy and water use; •  Increase use of alternative fuels and renewable energy; •  Integrate green building concepts in major renovations and new Spec Item Title Description construction; •  Prevent pollution at the source; and •  Continual improvement. Policy: •  Protect public health and the environment by being an environmentally responsible member of the community; •  Preserve our natural, historic and cultural resources; •  Conserve natural resources by reducing what we discard, reusing items, and recycling materials, which includes purchasing products made from recycled materials; •  Integrate sound environmental practices into all our operations and business decisions; Integrate environmental protection requirements and pollution prevention initiatives into the early planning, design and procurement of facilities, equipment and material, as well as the Spec Item Title Description planning and implementation of military training activities; •  Prevent or minimize pollution at its source as we seek out ways to eliminate or further minimize use of hazardous materials and generation of hazardous waste; •  Maintain a sound partnership with regulatory agencies to sustain our compliance with existing and new environmental laws and regulations; •  Enhance our program as we develop and implement an Environmental Management System; and •  Adhere to this policy, remind one another to do so, and ensure that our entire community knows this is our policy by our actions as well as our words. 2.10.1 Energy Management Program The Contractor shall comply with the installation's energy management program. 2.10.1.1 Water Conservation Plan N/A 2.10.1.2 Energy Efficient Products The Contractor shall use life-cycle cost analysis in making decisions about investments in products, services, construction and other projects to lower Federal Government’s costs and reduce energy consumption. The Contractor shall maintain monitoring elect lifecycle cost effective Energy Star and measurement information other energy-efficient products when acquiring energy-using products. For product groups where Energy Star labels are not yet available, select products that are in upper 25 percent of energy efficiency as designated by the Federal Energy Management Program. Use of high energy consuming tools or equipment is subject to address the EMS goals and policy and provide the EMS Goals and Policy Measurement Information to approval by the KO when requestedprior to use. 2.10.2 Environmental Protection The Contractor shall comply with all applicable Federal, state, and local laws, regulations, and executive orders, and with base-wide instructions, standards, and permit requirements. In the event an EMS nonconformance or All environmental noncompliance associated protection matters shall be coordinated with the contracted services, tasksKO. Inspection of any of the facilities operated by the Contractor may be accomplished by the Installation Environmental Protection Coordinator, or actions occurs, the Contractor shall take corrective and/or preventative actions, assume legal and financial liability for the noncompliance and take corrective action immediately to remedy the noncomplianceauthorized officials on a no-notice basis during Government regular working hours. The Contractor shall ensure comply with the instructions of the cognizant Navy Medical Department with respect to avoidance of conditions which create a nuisance or which may be hazardous to the health of military or civilian personnel. The Contractor is responsible for ensuring that its employees receive applicable environmental and occupational health and safety training, and are aware kept up to date on regulatory required specific training for the type of work to be conducted onsite. All on-site Contractor Spec Item Title Description personnel, and their roles subcontractor personnel, performing tasks that have the potential to cause a significant environmental impact shall be competent on the basis of appropriate education, training or experience. 2.10.2.1 Sampling, Testing and responsibilities under the EMS and how these EMS roles and responsibilities affect work performed under the contract.Laboratory Services N/A

Environmental Management. and Sustainability The Contractor shall perform work under this contract consistent with the following Environmental Management System (EMS) goals and policy. Goals: •  Reduce purchase and use of toxic and hazardous materials; •  Expand purchase of green products and services; increase recycling; •  Reduce energy and water use; •  Increase use of alternative fuels and renewable energy; •  Integrate green building concepts in major renovations and new construction; •  Prevent pollution at the source; and •  Continual improvement. Policy: •  Protect public health and the environment by being an environmentally responsible member of the community; •  Preserve our natural, historic and cultural resources; •  Conserve natural resources by reducing what we discard, reusing items, and recycling materials, which includes purchasing products made from recycled materials; •  Integrate sound environmental practices into all our operations and business decisions; Integrate environmental protection requirements and pollution prevention initiatives into the early planning, design and procurement of facilities, equipment and material, as well as the Spec Item Title Description planning and implementation of military training activities; •  Prevent or minimize pollution at its source as we seek out ways to eliminate or further minimize use of hazardous materials and generation of hazardous waste; •  Maintain a sound partnership with regulatory agencies to sustain our compliance with existing and new environmental laws and regulations; •  Enhance our program as we develop and implement an Environmental Management System; and •  Adhere to this policy, remind one another to do so, and ensure that our entire community knows this is our policy by our actions as well as our words. The Contractor shall maintain monitoring and measurement information to address the EMS goals and policy and provide the EMS Goals and Policy Measurement Information to the KO when requested. In the event an EMS Spec Item Title Description nonconformance or environmental noncompliance associated with the contracted services, tasks, or actions occurs, the Contractor shall take corrective and/or preventative actions, assume legal and financial liability for the noncompliance and take corrective action immediately to remedy the noncompliance. The Contractor shall ensure that its employees are aware of their roles and responsibilities under the EMS and how these EMS roles and responsibilities affect work performed under the contract.

Environmental Management. The Company undertakes an environmental assessment when required, to determine appropriate measures to minimise adverse environmental impacts from project activities. Environmental issues that have been identified at the __________ are as follows; Spills or leakage from equipment is to be cleaned up immediately and Sustainability The Contractor shall perform work under this contract consistent reported to the Site Safety and Environmental officer. Bricksaw’s are to be placed on water drip trays with water pumps fitted as part of YORK FORTER AUSTRALASIA procedures to control water usage and contaminated water from leaching into the following Environmental Management System (EMS) goals soil. Bricksaw’s will be enclosed in a cutting room and policy. Goals: • Reduce purchase and the use of toxic silenced blades for wet cutting will be required to reduce noise and hazardous materials; • Expand purchase dust from contaminating surrounding areas. Dry cutting of green products and services; increase recycling; • Reduce energy and water use; • Increase use refractory materials is also required to be carried out in an enclosed cutting room with dust extraction systems used for dust collection. Washing down of alternative fuels and renewable energy; • Integrate green building concepts in major renovations and new construction; • Prevent pollution at the source; and • Continual improvement. Policy: • Protect public health and the environment by being an environmentally responsible member of the community; • Preserve our natural, historic and cultural resources; • Conserve natural resources by reducing what we discard, reusing items, and recycling materials, which includes purchasing products made from recycled materials; • Integrate sound environmental practices into all our operations and business decisions; Integrate environmental protection requirements and pollution prevention initiatives into the early planning, design and procurement of facilities, Acid Proof refractory equipment and material, / or tools is to be carried out in the designated wash down area as well as instructed by the Spec Item Title Description planning and implementation Principal Contractor. All refractory waste is to be disposed of military training activities; • Prevent or minimize pollution at its source as we seek out ways to eliminate or further minimize use of hazardous materials and generation of hazardous waste; • Maintain a sound partnership with regulatory agencies to sustain our compliance with existing and new environmental laws and regulations; • Enhance our program as we develop and implement an Environmental Management System; and • Adhere to this policy, remind one another to do so, and ensure that our entire community knows this is our policy in YORK FORTER AUSTRALASIA’s designated bins for removal from site by our actions as well as our wordsnominated waste disposal provider. The Contractor shall maintain monitoring DOCUMENTATION SPECIFIC TO THIS PROJECT WILL BE PRODUCED AND COMPLETED ACCORDING TO THE REQUIREMENTS OF THE CONTRACT. STANDARD FORMS USED ON PROJECTS OF THIS TYPE ARE LISTED BELOW: * CONSTRUCTION SCHEDULE (TO BE ISSUED ON A WEEKLY BASIS) þ * VESSEL TAKE OVER CERTIFICATE þ * VESSEL RELEASE CERTIFICATE þ * SITE ▇▇▇▇▇▇▇ SHEET þ * EMPLOYEE TIME SHEET þ * CHANGE IN SPECIFICATION þ * CONTACT RECORD SHEET þ * INSPECTION and measurement information TEST PLANS þ * EQUIPMENT HIRE REGISTER þ * ENTRY PERMIT CONFINED SPACE þ * CONFINED SPACE RECORD SHEET þ * CHECKLIST PRIOR TO STARTING WORK þ * DAILY INSPECTION SHEET — REFRACTORIES þ * DOCUMENT REGISTER þ * CASTING SHEET þ * NON — CONFORMANCE REPORT þ * INCOMING INSPECTION REPORT þ * SITE PROGRESS REPORT — DAILY þ * YFA DRUG AND ALCOHOL POLICY þ * YFA ENVIRONMENTAL POLICY þ * ACCIDENT LOG þ * RISK ASSESSMENT þ * ENVIRONMENTAL PLAN þ * SITE SAFETY PLAN þ * EMPLOYEE INDUCTION HANDBOOK þ CLIENT: CONTRACT DESCRIPTION: YFA JOB REF No: CLIENT JOB REF No: DATE: / / AREA: POSITION: Material Type: Weather Conditions: Material Manufacturer: Total Material Placed: Material Date of Manufacture: Sample Required? YES / NO Material Temperature: Sample Number: Ambient Temperature: (If yes, record batch number on sample) Completed By: Supervisors Signature: CLIENT: CONTRACT DESCRIPTION: YFA JOB REF No: CLIENT JOB REF No: SECTION OF PLANT BEING WORKED ON: INSPECTED BY: SIGNATURE: INSPECTION DATE: / / Manufacturer: Material Type: Batch Number: Identification ▇▇▇▇: Installation Surface Clean: Anchor Condition: Joint Condition: Expansion Joint Condition: Type of Mortar being Used: N/A N/A N/A N/A Mortar Batch No: N/A N/A N/A N/A Formwork Condition: N/A N/A Ambient Temperature: N/A Water Temperature: N/A Water Quality: N/A Final Inspection: (Initials). C = Controlled U = Uncontrolled a. Product / Work Identification Job No. : Client : Project : Supplier: Serial/Part No. : Purchase Order No. : Product Description : Drawing No. : Quantity: Date: Originator : b. Cause and Description of c. Corrective Action to address the EMS goals and policy and provide the EMS Goals and Policy Measurement Information to the KO when requested. In the event an EMS nonconformance or environmental noncompliance associated with the contracted services, tasks, or actions occurs, the Contractor shall take corrective and/or preventative actions, assume legal and financial liability for the noncompliance and take corrective action immediately to remedy the noncompliance. The Contractor shall ensure that its employees are aware of their roles and responsibilities under the EMS and how these EMS roles and responsibilities affect work performed under the contract.Resolve Non-Conformance Root Cause

Environmental Management. and Sustainability The Contractor shall perform work under this contract consistent with the following Environmental Management System (EMS) goals and policy. Goals: • Reduce purchase and use of toxic and hazardous materials; • Expand purchase of green products and services; increase recycling; • Reduce energy and water use; Spec Item Title Description • Increase use of alternative fuels and renewable energy; • Integrate green building concepts in major renovations and new construction; • Prevent pollution at the source; and • Continual improvement. Policy: • Protect public health and the environment by being an environmentally responsible member of the community; • Preserve our natural, historic and cultural resources; • Conserve natural resources by reducing what we discard, reusing items, and recycling materials, which includes purchasing products made from recycled materials; • Integrate sound environmental practices into all our operations and business decisions; Integrate environmental protection requirements and pollution prevention initiatives into the early planning, design and procurement of facilities, equipment and material, as well as the Spec Item Title Description planning and implementation of military training activities; • Prevent or minimize pollution at its source as we seek out ways to eliminate or further minimize use of hazardous materials and generation of hazardous waste; • Maintain a sound partnership with regulatory agencies to sustain our compliance with existing and new environmental laws and regulations; • Enhance our program as we develop and implement an Environmental Management System; and • Adhere to this policy, remind one another to do so, and ensure that our entire community knows this is our policy by our actions as well as our words. The Contractor shall maintain monitoring and measurement information to address the EMS goals and policy and provide the EMS Goals and Policy Measurement Information to the KO when requested. In the event an EMS nonconformance or environmental noncompliance associated with the contracted services, tasks, or actions occurs, the Contractor shall take corrective and/or preventative actions, assume legal and financial liability for the noncompliance and take corrective action immediately to remedy the noncompliance. The Contractor shall ensure that its employees are aware of their roles and responsibilities under the EMS and how these EMS roles and responsibilities affect work performed under the contract. 2.10.1 Energy Management Program Not applicable . 2.10.1.1 Water Conservation Plan Not applicable 2.10.1.2 Energy Efficient Products Not applicable 2.10.2 Environmental Protection The Contractor shall comply with all applicable Federal, state, and local laws, regulations, and executive orders, and with base-wide instructions, standards, and permit requirements. All environmental protection matters shall be coordinated with the KO. Inspection of any of the facilities operated by the Contractor may be accomplished by the Installation Environmental Protection Coordinator, or authorized officials on a no-notice basis during Government Spec Item Title Description regular working hours. The Contractor shall comply with the instructions of the cognizant Navy Medical Department with respect to avoidance of conditions which create a nuisance or which may be hazardous to the health of military or civilian personnel. The Contractor is responsible for ensuring that its employees receive applicable environmental and occupational health and safety training, and are kept up to date on regulatory required specific training for the type of work to be conducted onsite. All on-site Contractor personnel, and their subcontractor personnel, performing tasks that have the potential to cause a significant environmental impact shall be competent on the basis of appropriate education, training or experience.