Common use of Domestic Preference Clause in Contracts

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative Solutions, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 Signature Date Signature Date Xxxxxx Xxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative Solutions, Inc. dba CCS Global Tech Elegant Enterprise-Wide Solutions North Central Texas Council of Governments 2/9/2024 02/05/2024 Jan 31, 2024 2/1/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxx Xxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO President Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsFedTec, Inc. dba CCS Global Tech LLC North Central Texas Council of Governments 2/9/2024 02/05/2024 02/01/2024 2/19/2024 Signature Date Signature Date Xxxxx Xxxxxx Xxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO Senior Director - State & Local Services Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsvTech Solution, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 2/12/2024 Signature 02/08/2024 Date Signature Date Xxxxxx Xxxx Xxxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO President Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsDavteq, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 Signature 02/02/24 Date 2/12/2024 Signature Date Signature Date Xxxxxx Xxxx Xxx Xxxxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO CEO & President Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- - ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsNiha Technologies, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 2/12/2024 2/19/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO CEO Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsInfojini, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 2/7/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxxxx Xxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO President Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative Solutions, Inc. dba CCS Global Tech Effervescent Consulting LLC North Central Texas Council of Governments 2/9/2024 02/05/2024 2/15/2024 Signature Date Signature Date Xxxxxx Xxxx April Dua Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO CFO Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative Solutions, Inc. dba CCS Global Tech 02/08/2024 RightIT Solutions LLC North Central Texas Council of Governments 2/9/2024 02/05/2024 2/8/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO CEO Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative Solutions, Inc. dba CCS Global Tech Ivoyant LLC North Central Texas Council of Governments 2/9/2024 02/05/2024 2/7/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxx Xxxxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsM2 Strategy, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 2/15/2024 2/23/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO President Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsFugro USA Land, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 3/8/2024 03/06/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO Regional Business Line Director Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsPlanet Technologies, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 2/7/2024 Signature Date Signature Date Xxxxxx Xxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO Printed Name Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsFedTec, Inc. dba CCS Global Tech LLC North Central Texas Council of Governments 2/9/2024 02/05/2024 02/01/2024 Signature Date Signature Date Xxxxx Xxxxxx Xxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO Senior Director - State & Local Services Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative Solutions02/06/2024 SBase Technologies, Inc. dba CCS Global Tech North Central Texas Council of Governments 2/9/2024 02/05/2024 2/7/2024 Signature Date Signature Date Xxxxxx Xxxxxxx Xxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO President Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsMCCi, Inc. dba CCS Global Tech LLC North Central Texas Council of Governments 2/9/2024 02/05/2024 E-SIGNED by Xxxxxx X'Xxxxx on 2024-03-05 17:48:29 GMT March 05, 2024 3/5/2024 Signature Date Signature Date Xxxxxx Xxxx Printed Name X'Xxxxx R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO Printed Name Chief Operating Officer Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative Solutions, Web-Hed Technologies Inc. dba CCS Global Tech Webhead North Central Texas Council of Governments 2/9/2024 02/05/2024 Signature February 9, 2024 Date 2/15/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxxxx X. Xxxxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO CEO & President Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative SolutionsXxxxxx and Xxxxxxx, Inc. dba CCS Global Tech LLP North Central Texas Council of Governments 2/9/2024 02/05/2024 2/16/2024 Signature Date 3/7/2024 Signature Date Xxxxx Xxxxxx Xxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO Partner, IT Advisory Services Title APPENDIX A Statement of Work EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.

Domestic Preference. As appropriate and to the extent consistent with law, the Contractor should, to the greatest extent practicable, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Consistent with §200.322, the following items shall be defined as: “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stage through the application of coatings, occurred in the United States. “Manufactured products” means items and construction materials composed in whole or in part of non- ferrous metals such as aluminum; plastics and polymer-based products such as polyvinyl chloride pipe; aggregates such as concrete; glass, including optical fiber; and lumber. In witness whereof, the parties have executed this Agreement as of the Effective Date. California Creative Solutionsalliantgroup, Inc. dba CCS Global Tech LP North Central Texas Council of Governments 2/9/2024 02/05/2024 Xxxxxx Xxxxxx (Jan 30, 2024 07:27 CST) Jan 30, 2024 2/12/2024 Signature Date Signature Date Xxxxxx Xxxx Xxxxxx Printed Name R. Xxxxxxx Xxxxxxxx Executive Director CFO/COO CEO Title APPENDIX A Statement of Work Contractor indicates the ability to provide the following Services under this Agreement: EXHIBIT A Description of Desired Product Categories for Proposed Pricing Respondents should furnish a proposal that specifies pricing for the products and services they propose. Responses to this Exhibit should be addressed in Tab F. Responses are encouraged from vendors who can only provide a handful of products and services. Respondents are not expected to be able to provide the entirety of the desired services, though are welcome to if they are able! NCTCOG prefers vendors that provide a sole source of responsibility for the products and services provided under a resulting contract. If Proposer requires the use of dealers, resellers, or subcontractors to provide the products or services, the Proposal should address how the products or services will be provided to Members and describe the network of dealers, resellers, and/or subcontractors that will be available to serve TXShare Members under a resulting contract. NCTCOG desires the broadest possible selection of products and services being proposed over the largest possible geographic area and to the largest possible cross-section of TXShare current and potential members.