Designated Locations. Prior to performing the physical installation of the Units, Flock shall advise Customer on the location and positioning of the Units for optimal license plate image capture, as conditions and location allow. While Flock will provide advice regarding the location of positioning of such Units, Customer will have the ultimate decision regarding the location, position, and angle of the Units (each Unit location so designated by Customer, a “Designated Location”). Due to the fact that Customer selects the Designated Location, Flock shall have no liability to Customer resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations, or delay in installation due to Customer’s delay in identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready. Designated Locations that are suggested by Flock and accepted by Customer without alteration will be known as Flock Designated Locations. After a deployment plan with Designated Locations and equipment has been agreed upon by both Flock and the Customer, any subsequent changes to the deployment plan (“Reinstalls”) driven by Customer's request will incur a charge for Flock’s then-current list price for Reinstalls, as listed in the then-current Reinstall Policy (available at xxxxx://xxx.xxxxxxxxxxx.xxx/reinstall-fee-schedule) and any equipment charges. These changes include but are not limited to camera re-positioning, adjusting of camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like
Designated Locations. Prior to performing the physical installation of the Units, Flock shall advise Customer on the location and positioning of the Units for optimal license plate image capture, as conditions and location allow. While Flock will provide advice regarding the location of positioning of such Units, Customer will have the ultimate decision regarding the location, position, and angle of the Units (each Unit location so designated by Customer, a “Designated Location”). Due to the fact that Customer selects the Designated Location, Flock shall have no liability to Customer resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations. After an installation plan with Designated Locations and equipment has been agreed upon by both Flock and the Customer, any subsequent changes to the installation plan driven by Customer's request will incur a $250 charge in addition to any equipment charges. These changes include but are not limited to camera re-positioning, adjusting of camera mounting, re-angling, changes to heights of poles, and removing foliage.
Designated Locations. The Designated Locations are as follows:
Designated Locations. The Company shall keep the Pledged Spare Parts in a Secure Location at one or more of the Designated Locations and, except as otherwise permitted under Sections 3.02(a) or 3.02(b)(1) of this Mortgage, shall not suffer or permit any Pledged Spare Part to be stored at any other location. The Company shall not suffer or permit any Pledged Spare Parts at any Designated Location to be commingled with any Excluded Parts. The Company shall ensure that each Designated Location is adequate for warehousing and storing the Pledged Spare Parts. With respect to each Designated Location that is leased (including any ground lease and any lease of any temporary buildings or the like) or subleased by the Company, the Company shall have obtained from the Company’s immediate landlord, and if requested by the Secured Party, from each landlord in the chain back to the owner of the real property and the owner of the improvements (whether permanent or temporary, if separate from the real property), a waiver of any and all right or interest that such Person may otherwise have in the Pledged Spare Parts and such Person’s consent, if applicable, to access by the Secured Party and/or any Lender or any representative of any of them to the premises in connection with the exercise of any rights or remedies under or pursuant to this Mortgage (in each case, in form and substance satisfactory to the Secured Party). In addition, with respect to each Designated Location owned by the Company or any of its Affiliates, if any, the Company shall have obtained from each other Person that may have an interest in the real property and/or the improvements (whether permanent or temporary improvements) at such location (whether as mortgagee or otherwise) a waiver of any and all right or interest that such Person may otherwise have in the Pledged Spare Parts and such Person’s consent, in the event that such Person shall have obtained possession and control of the relevant premises from the Company or the Company’s Affiliate (whether upon foreclosure or other exercise of remedies by such Person or otherwise), to access by the Secured Party and/or any Lender or any representative of any of them to the premises in connection with the exercise of any rights or remedies under or pursuant to this Mortgage (in each case, in form and substance satisfactory to the Secured Party). The Company shall add as a Designated Location (in accordance with this Section 3.02(b)(2)) any location where Pledged Spare Parts m...
Designated Locations. State Street and the Customer agree that each will engage or retain the services of trained personnel to enable both parties to perform their respective obligations under this Agreement. State Street agrees to use commercially reasonable efforts to maintain the System so that it remains serviceable, provided, however, that State Street does not guarantee or assure uninterrupted remote access use of the System.
Designated Locations. Datec will manage the BSP WAN operations from its Corporate Head Office located in Waigani Drive, Port Moresby. In order for this to occur certain routers/switches and associated network equipment will be located at Datec Commercial in Confidence Page 24 May 2004 Network Management Outsourcing Agreement The Current Router and Switch Locations that will be covered by this agreement are: [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] [*****] Performance Standards
Designated Locations. Prior to performing the physical installation of the Units, Flock shall advise Agency on the location and positioning of the Units for optimal license plate image capture, as conditions and location allow. Flock and Agency must mutually agree on the location (mounting site or pole), position and angle of the Units (each Unit location so designated by Agency, a “Designated Location”). Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in identifying the choices for the Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready. Designated Locations that are suggested by Flock and accepted by Agency without alteration will be known as Flock Designated Locations. After a deployment plan with Designated Locations and equipment has been agreed upon by both Flock and the Agency, any subsequent changes to the deployment plan (“Reinstalls”) driven by Agency's request will incur a charge for Flock’s then-current list price for Reinstalls, as listed in the then-current Reinstall Policy (available at xxxxx://xxx.xxxxxxxxxxx.xxx/reinstall-fee-schedule) and any equipment charges. These changes include but are not limited to camera re-positioning, adjusting of camera mounting, re-angling, removing foliage, camera replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Reinstallation will only be charged if requested by Agency and only after initial installation and successful testing of the Hardware and Unit.
Designated Locations. For installation of Flock Hardware, excluding Falcon Flex products, prior to performing the physical installation of the Flock Hardware, Flock shall advise Agency on the location and positioning of the Flock Hardware for optimal license plate image capture, as conditions and location allow. Flock may consider input from Agency regarding location, position and angle of the Flock Hardware (“Designated Location”) and collaborate with Agency to design the Deployment Plan confirming the Designated Locations. Flock shall have final discretion on location of Flock Hardware. Flock shall have no liability to Agency resulting from any poor performance, functionality or Footage resulting from or otherwise relating to the Designated Locations or delay in installation due to Agency’s delay in confirming Designated Locations, in ordering and/or having the Designated Location ready for installation including having all electrical work preinstalled and permits ready, if necessary. After installation, any subsequent changes to the Deployment Plan (“Reinstalls”) will incur a charge for Xxxxx’s then- current list price for Reinstalls, as listed in the then-current Reinstall policy (available at xxxxx://xxx.xxxxxxxxxxx.xxx/reinstall-fee-schedule) and any equipment fees. For clarity, Agency will receive prior notice and provide approval for any such fees. These changes include but are not limited to re-positioning, adjusting of the mounting, re-angling, removing foliage, replacement, changes to heights of poles, regardless of whether the need for Reinstalls related to vandalism, weather, theft, lack of criminal activity in view, and the like. Flock shall have full discretion on decision to reinstall Flock Hardware. Notwithstanding anything hereinabove to the contrary, Agency being a Georgia tax exempt municipality shall not be invoiced for, be liable for, or pay any amount constituting Georgia sales tax, use, excise, gross receipts, or other similar taxes or federal taxes with respect to any aspect of the Agreement.
Designated Locations. This Agreement shall be applicable to all Buyer's activities carried on at the location(s) set forth in Section 1 above and if the operations at any such locations are expanded or relocated to new locations then, at Seller's and Buyer's option, this Agreement shall be applicable at such locations ("Designated Locations(s)").
Designated Locations. The street address, and county and state, of each place of business of each Borrower and each place where such Borrower has, leases, maintains or stores Property, are listed on Schedule 3.23. The mailing address of Borrower's chief executive office is 4350 North Fairfax Drive, Sxxxx 000, Xxxxxxxxx, Xxxxxxxx 00000, xxxxx xx xx Xxxxxxxxx Xxxnty, Virginia. As of the Effective Date, and except as disclosed on Schedule 3.23, Borrower does not own any interest, including any leasehold interest, in real estate.
