Cable Installation in Conduit Sample Clauses

Cable Installation in Conduit. The fiber optic cable shall be installed using either a sealed pneumatic cable blowing system, or a powered pulling winch and hydraulic powered assist pulling wheels. The maximum pulling force to be applied to the fiber optic cable shall be six hundred pounds (600 lbs.). Sufficient pulling assists will be available and used to insure the maximum pulling force is not exceeded at any point along the pull. The cable shall be lubricated at the reel and all pulling assist locations. A pulling swivel breakaway rated at six hundred pounds (600 lbs.) shall be used at all times. Splices will only be allowed at planned junctions and reel ends. The cable will not be cut and spliced for the contractor's convenience during the cable pulling operation. All splices will be contained in a handhole or manhole. A minimum of twenty meters (20m) of slack cable will be left in all ------- intermediate handholes and manholes. A minimum of thirty meters (30m) of slack cable will be left in all ------- splice locations. A minimum of fifty meters (50m) of slack cable will be left in all ------- facility locations, i.e., POP sites, switch sites, regen sites, or CEV'S.
Sample 1Sample 2
AutoNDA by SimpleDocs
Cable Installation in Conduit. The fiber-optic cable shall be installed using either a sealed pneumatic cable blowing system or a powered pulling winch and hydraulic powered assist pulling wheels. The maximum pulling force to be applied to the fiber-optic cable shall be six hundred pounds (600 lbs.). Sufficient pulling assists shall be available and used to insure the maximum pulling force is not exceeded at any point along the pull. o The cable shall be lubricated at the reel and all pulling assist locations.
Sample 1Sample 2
Cable Installation in Conduit. The cable shall be installed using either a sealed pneumatic cable blowing system or a powered pulling winch and hydraulic powered assist pulling wheels. ? The maximum pulling force to be applied to the cable shall be six hundred pounds (600 lbs.). ? Sufficient pulling assists shall be available and used to insure the maximum pulling force is not exceeded at any point along the pull. ? The cable shall be lubricated at the reel and all pulling assist locations. ? A pulling swivel breakaway rated at six hundred pounds (600 lbs.) shall be used at all times. ? Splices shall be allowed only at planned junctions and reel ends. ? All splices shall be contained in a handhole or manhole. ? A minimum of twenty meters (20m) of slack cable shall be left in all intermediate handholes and manholes. ? A minimum of thirty meters (30m) of slack cable shall be left in all splice locations. ? A minimum of fifty meters (50m) of slack cable shall be left in Transmission Sites and points of presence. ? PVC conduit/innerduct may be split, with the cable installed inside the split duct and plowed in. 7. Manholes and Handholes ? Manholes shall be placed in traveled surface streets and shall have locking lids. ? Handholes shall be placed in all other areas, and be installed with a minimum of eighteen inches (18") of soil covering lid.
Sample 1
Cable Installation in Conduit o The cable shall be installed using either a sealed pneumatic cable blowing system or a Exhibit E - Page 2 powered pulling winch and hydraulic powered assist pulling wheels. o The maximum pulling force to be applied to the cable shall be six hundred pounds (600 lbs.). o Sufficient pulling assists shall be available and used to insure the maximum pulling force is not exceeded at any point along the pull. o The cable shall be lubricated at the reel and all pulling assist locations.
Sample 1

Related to Cable Installation in Conduit

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations 7.1 Lessee's Obligations.

  • Lending Installations Each Lender may book its Loans at any Lending Installation selected by such Lender and may change its Lending Installation from time to time. All terms of this Agreement shall apply to any such Lending Installation and the Loans and any Notes issued hereunder shall be deemed held by each Lender for the benefit of any such Lending Installation. Each Lender may, by written notice to the Agent and the Borrower in accordance with Article XIII, designate replacement or additional Lending Installations through which Loans will be made by it and for whose account Loan payments are to be made.

  • Permitted Alterations Tenant shall not make or permit any Alterations without the prior written consent of Landlord (which consent shall not be unreasonably withheld, conditioned or delayed). Notwithstanding the foregoing, in no event shall any Alterations (i) affect the exterior of the Building or the outside areas of the Property or the Building (or be visible from adjoining sites), (ii) affect or penetrate any of the structural portions of the Building, including, but not limited to, the roof, (iii) require any change to the basic floor plan of the Premises, any change to the structural or mechanical components of the Premises, or any governmental approval or permit as a prerequisite to the construction thereof, (iv) interfere in any manner with the proper functioning of or Landlord’s access to any mechanical, electrical, plumbing or HVAC systems, facilities or equipment located in or serving the Building, or (v) diminish the value of the Premises. All Alterations shall be constructed pursuant to plans and specifications previously provided to and, when applicable, approved in writing by Landlord, shall be installed by a licensed contractor at Tenant’s sole expense in compliance with all Applicable Laws, and shall be accomplished in a good and workmanlike manner conforming in quality and design with the Premises existing as of the Commencement Date and in accordance with the provisions of Section 22.1 below. No Hazardous Materials, including, but not limited to, asbestos or asbestos-containing materials, shall be used by Tenant or Tenant’s Agents in the construction or installation of any Alterations permitted hereunder. All Alterations made by Tenant shall be and become the property of Landlord upon the construction or installation thereof and shall not be deemed Tenant’s Personal Property; provided, however, that Landlord may, at its option and by notice delivered to Tenant at the time of Landlord’s approval, require that Tenant, upon the expiration or sooner termination of this Lease, at Tenant’s expense, remove any or all Alterations and return the Premises to its condition as of the Commencement Date, normal wear and tear excepted. Notwithstanding any other provisions of this Lease to the contrary, Tenant shall be solely responsible for the maintenance, repair and replacement of any and all Alterations made by or for the benefit of Tenant (including, without limitation, by Landlord for the benefit of Tenant). In addition, Tenant shall be responsible for the payment of any increase in Real Property Taxes that are attributable to any Alterations, which payment shall be made by Tenant to Landlord within ten (10) days following Landlord’s written demand therefor from time to time. Notwithstanding anything to the contrary in this Section 8.1, Tenant, without Landlord’s consent, may make minor Alterations to the Premises which do not affect the Building’s structure or operating systems and that do not cost more than $50,000.00 per project; provided however, Tenant shall provide notice no less than ten (10) business days’ notice of such Alterations.

  • Surrender of Premises Ownership and Removal of Trade Fixtures 23.1 No act or thing done by Landlord or any agent or employee of Landlord during the Lease Term shall be deemed to constitute an acceptance by Landlord of a surrender of the Premises unless such intent is specifically acknowledged in writing by Landlord. The delivery of keys to the Premises to Landlord or any agent or employee of Landlord shall not constitute a surrender of the Premises or effect a termination of this Lease, whether or not the keys are thereafter retained by Landlord, and notwithstanding such delivery Tenant shall be entitled to the return of such keys at any reasonable time upon request until this Lease shall have been properly terminated. The voluntary or other surrender of this Lease by Xxxxxx, whether accepted by Landlord or not, or a mutual termination hereof, shall not work a merger, and at the option of Landlord shall operate as an assignment to Landlord of all subleases or subtenancies affecting the Premises or terminate any or all such subtenants or subtenancies.

  • Trade Fixtures Throughout the Lease Term, Tenant may provide and install, and shall maintain in good condition, any Trade Fixtures required in the conduct of its business in the Premises. All Trade Fixtures shall remain Tenant’s property.

  • Additions and Alterations 12 ARTICLE 9

  • AMENDMENT OR ALTERATION No amendment or alteration of the terms of this Agreement shall be valid unless made in writing and signed by both of the parties hereto.

  • Building Directory A directory for the Building will be provided for the display of the name and location of tenants. Landlord reserves the right to approve any additional names Tenant desires to place in the directory and, if so approved, Landlord may assess a reasonable charge for adding such additional names.

  • Window Coverings No curtains, draperies, blinds, shutters, shades, awnings, screens or other coverings, window ventilators, hangings, decorations or similar equipment shall be attached to, hung or placed in, or used in or with any window of the Building without the prior written consent of Landlord, and Landlord shall have the right to control all lighting within the Premises that may be visible from the exterior of the Building.

Time is Money Join Law Insider Premium to draft better contracts faster.