Battery Chargers Sample Clauses

Battery Chargers. The Facility shall include two 125-Vdc battery chargers for each battery system. These two chargers feeding a battery system shall be powered from two separate sources of AC power. Each battery charger shall be sized to furnish 100% of the current required to recharge the battery from discharge condition to the fully charged condition in 24 hours while maintaining the continuous normal steady-state loads. The chargers shall be capable of regulated and filtered voltage operation with the battery disconnected (battery eliminator type), with a maximum ripple of 100 mV rms under these conditions. Battery chargers shall have load sharing features and temperature compensation feature The battery charger shall have a voltage regulation of ±0.5% from no load to full load with a ±10% supply voltage variation. It shall operate properly over ±5% supply voltage frequency variation. It shall be provided with an automatic load limiting feature that shall limit the output current to 110% of its rated load without tripping the AC or DC breaker or blowing fuses. It shall also be capable of picking up a discharged battery without tripping. The power supply for each charger shall be 480V, 60 Hz, three-phase. The battery charger shall be designed to prevent the battery from discharging back into the charger in case of AC power failure or other charger malfunction. The battery charger shall be equipped with standard generating station accessories, including undervoltage relays, ground detectors, overload protection, adjustable float and equalize charger settings and timers. Thermal magnetic circuit breakers of suitable current carrying and interrupting capacity shall be used.
Sample 1Sample 2
AutoNDA by SimpleDocs
Battery Chargers. Each battery charger furnished shall be self- regulating, solid-state silicon controlled full wave rectifier type designed for single and parallel operation with the batteries specified under these specifications. The parallel operation features of the battery chargers s hall include cross compensation providing for equal sharing of the charger loads. Chargers need not be designed for automatic load sharing during parallel operation. The charges will be served from a 480-volt, 3 phase, 60-hertz system. The battery chargers shall maintain output voltage within plus or minus 1/2 per cent from no load to full load with an input power supply deviation in voltage level of plus or minus 10 per cent and an input power supply deviation in frequency of plus or minus 5 per cent. Solid-state electronic circuits shall have ac and dc transient voltage protection and shall be designed to recharge a totally discharged battery without overloading and without causing interrupting operation of ac or dc circuit breakers. Redundant battery chargers shall be provided for each of the power blocks. On a "Main-Tie-Main" 480V Switchgear system, the redundant charger will be fed from the bus opposite of the primary battery charger for greater reliability. All battery chargers will be equipped with a input AC circuit breaker and a output D.C. circuit breaker with current limiting on the total battery charger output current to protect the batteries and the charger.
Sample 1
Battery Chargers. For all DC systems the contractor shall supply and install a battery charger for each system similar to Xxxxxxx Industries, HQ series. Each charger supplied shall be ABS listed and certified as well as USCG listed for marine service and built to carry continuous loads. The battery chargers for the 12 volt DC systems shall be sized to meet the power requirements for the respective system’s batteries. The battery shall be located with the respective battery banks and be suitable for operation in 50-degrees C. For the 24 volt DC generator starting systems, the contractor shall supply and install a battery charger similar to a La Marche model ESCR battery charger. Each charger supplied shall be ABS approved. The battery chargers for the 24 volt DC starting systems shall be sized to meet the power requirements for the generator set diesel engine starting batteries. The battery chargers shall be mounted in the Generator Room and be suitable for operation in 50 degrees C. The input voltage for all chargers shall be 120 volt AC, 60-Hz and all chargers shall be supplied with ammeters. All battery charger installations shall have a monitoring and alarm system in compliance with ABS River Rules (4-5- 4/7.19.4(e)).
Sample 1
Battery Chargers. Tester shall perform visual and mechanical inspections listed in the latest revision of the XXXX Acceptance Testing Specification section 7.18.2, including the following: Compare equipment nameplate data with drawings and specifications. Inspect for physical and mechanical condition. Inspect anchorage, alignment, and grounding. Perform electrical inspections listed in the latest revision of the XXXX Acceptance Testing Specification section 7.18.2, including the following: Verify float voltage, equalize voltage, and high voltage shutdown settings. Verify current limit. Verify correct load sharing (in case of parallel chargers). Verify calibration of meters. Verify operation of alarms. Measure and record input and output voltage and current. Measure and record ac ripple current and voltage imposed on the battery.
Sample 1
Battery Chargers. Any battery chargers used in the MTRS shall be capable of being powered from 120 VAC 60 Hz and 240 VAC 50 Hz.
Sample 1
Battery Chargers. Battery charging units not equipped with an automatic shut-off feature can cause substantial and expensive damage to warehouse floors resulting from battery acid spills from over-charged batteries. Tenant acknowledges and agrees that Tenant shall be solely and fully liable for the expense of repair or replacement of floors within the Premises, including concrete slab floors, required as a result of damage caused by battery charging units. In order to reduce the risk that any such damage shall occur, all battery charging units operated or maintained by Tenant at the Premises shall be equipped with an original equipment automatic shut-off feature, or shall have an after-market automatic shut-off device added thereto.
Sample 1
Battery Chargers. 1. Each battery charger shall have the capacity to recharge the fully discharged battery within 24 hours while carrying the continuous load. The chargers shall be filtered “battery eliminator” type such that they can supply the 125Vdc system indefinitely with the battery disconnected.
Sample 1
AutoNDA by SimpleDocs

Related to Battery Chargers

  • Electricity Charges The licensee herein shall pay the electricity bills directly for energy consumed on the licensed premises and should submit original receipts to Licensor indicating that the electricity bills are paid.

  • Utility Charges Tenant shall pay or cause to be paid all charges for electricity, power, gas, oil, water and other utilities used in connection with the Leased Property.

  • Service Charge The Tenant must pay the Service Charge in accordance with Part 1 of Schedule 3. VAT The Tenant must pay: VAT on any consideration in respect of a VAT Supply to the Tenant by the Landlord at the same time as the consideration is paid; and on demand VAT (and interest, penalties and costs where these are incurred because of anything the Tenant does or fails to do) charged in respect of any VAT Supply to the Landlord in respect of the Premises where that VAT is not recoverable by the Landlord from HM Revenue & Customs. The Tenant must not do anything that would result in the disapplication of the option to tax in respect of the Landlord’s interest in the Estate. Interest on overdue payments The Tenant must pay interest on the Rents and on all other sums not paid on or by the due date (or, if no date is specified, not paid within 10 Business Days after the date of demand). Interest will be payable at the Interest Rate for the period starting on the due date (or date of demand) and ending on the date of payment. Reimburse costs incurred by the Landlord The Tenant must pay on demand the Landlord’s costs (including legal and surveyor’s charges and bailiff’s and enforcement agent’s fees) and disbursements in connection with: any breach of the Tenant’s obligations in this Lease, including the preparation and service of a notice under section 146 of the 1925 Act; any application by the Tenant for consent under this Lease, whether that application is withdrawn or consent is granted or lawfully refused, except in cases where the Landlord is required to act reasonably and the Landlord unreasonably refuses to give consent; [and] [carrying out works to the Premises to improve their Environmental Performance where the Tenant, in its absolute discretion, has consented to the Landlord doing so; and]44 the preparation and service of a schedule of dilapidations served no later than six months after the End Date. Third party indemnity45 The Tenant must indemnify the Landlord against all actions, claims, demands made by a third party, all costs, damages, expenses, charges and taxes payable to a third party and the Landlord’s own liabilities, costs and expenses incurred in defending or settling any action, claim or demand in respect of any personal injury or death, damage to any property and any infringement of any right, in each case arising from: the state and condition of the Premises or the Tenant’s use of them; the exercise of the Tenant’s rights; or the carrying out of any Permitted Works. In respect of any claim covered by the indemnity in clause 4.7.1, the Landlord must: give formal notice to the Tenant of the claim as soon as reasonably practicable after receiving notice of it; provide the Tenant with any information and assistance in relation to the claim that the Tenant may reasonably require and the Landlord is lawfully able to provide, subject to the Tenant paying to the Landlord all costs incurred by the Landlord in providing that information and assistance; and mitigate its loss (at the Tenant’s cost) where it is reasonable for the Landlord to do so.

  • Transportation Charges The cost of transporting Employees and Material necessary for the Mining Operations.

  • CONTRACT CHARGES The Contract Charges for the Services shall be structured using any of the following pricing mechanisms (as may be agreed by the Parties and set out in an SOW); Capped Time and Materials; Price per Story; Time and Materials; Fixed Price (to be used only for Services that are ancillary to software development services); or using such other pricing mechanism or combination of pricing mechanism thereof as may be agreed by the Parties. In consideration of the Supplier’s performance of its obligations under this Contract and in consideration of the specific services that are set out in an applicable SOW, the Customer shall pay the undisputed Contract Charges in accordance with the relevant SOW for the Release and the payment provisions set out at Clause 14 (Payment and VAT). The Customer shall, in addition to the Contract Charges and following delivery by the Supplier of an Invoice, pay the Supplier a sum equal to the VAT chargeable on the value of the Services supplied in accordance with this Contract. If at any time during this Contract Period the Supplier reduces its framework Prices for any Services which are provided under the framework Agreement (whether or not such Services are offered in a catalogue (if any) which is provided under the framework Agreement) in accordance with the terms of the framework Agreement, the Supplier shall immediately reduce the Contract Charges for such Services under this Contract by the same amount. The Supplier shall in any event ensure that the Contract Charges are at all times compliant and consistent with the charging structure set out in framework Schedule 8 (Charging Structure) and do not exceed the prices set out therein. Contract Charges:

  • Third-Party Charges Customer may incur charges from third party service providers that are separate and apart from the amounts charged by Comcast. These may include, without limitation, charges resulting from accessing on-line services, calls to parties who charge for their telephone based services, purchasing or subscribing to other offerings via the Internet or interactive options on Public View Video, Video, or otherwise. Customer agrees that all such charges, including all applicable taxes, are Customer’s sole responsibility. In addition, Customer is solely responsible for protecting the security of credit card information provided to others in connection with such transactions.

  • Shipping Charges Unless otherwise stated in the Bid Specifications, all deliveries shall be deemed to be freight on board (F.O.B.) destination tailgate delivery at the dock of the Authorized User. Unless otherwise agreed, items purchased at a price F.O.B. Shipping point plus transportation charges shall not relieve the Contractor from responsibility for safe and proper delivery notwithstanding the Authorized User’s payment of transportation charges. Contractor shall be responsible for ensuring that the Xxxx of Lading states “charges prepaid” for all shipments.

  • TRANSACTION CHARGES A charge will be charged for each transaction recorded on the shareholder accounting system, including, but not limited to, the following transactions: · Share purchases; · Share redemptions; · Fund liquidations; · Dividends; · Wire order purchases and redemptions (placement and confirmations); · Exchanges; · Account maintenance such as address changes; · Transfers; and · Account opening. For transactions within the 529 portfolios, FTIS will allocate the transaction fee on a pro-rata basis to the underlying Funds based on the 529 portfolio's holdings in such Funds. SCHEDULE B

  • MANAGEMENT CHARGE 16.1 In consideration of the establishment and award of this Framework Agreement and the management and administration by the Authority of the same, the Supplier agrees to pay to the Authority the Management Charge in accordance with Clause 16.2 below.

  • ORDER PROCESSING CHARGE H-GAC will apply an Order Processing Charge for each sale done through the H-GAC contract, with the exception of orders for motor vehicles. Any pricing submitted must include this charge amount per the most current H-GAC schedule. For motor vehicle orders, the Processing Charge is paid by the Customer.

Time is Money Join Law Insider Premium to draft better contracts faster.