Airside Service Roads Sample Clauses

Airside Service Roads. The main road connecting the various terminals and aprons and catering/ maintenance center has a width of 10m. Other airside roads are 2-lane roads, 7.5 m width. The perimeter fence inspection road shall be unpaved and minor roads to navigational aids shall be paved and have widths of 4 -7m.
AutoNDA by SimpleDocs
Airside Service Roads. An airside service road system shall be designed to connect the different facilities. The main service road system shall be laid out with a typical width of 10 m. A crash road system connecting the fire stations with the runway shall be constructed. From the runway ends the crash road shall be continued in the extension of the runway until the airside perimeter fence. All crash roads shall be designed with a width of 7.5 m. A secondary airside service road system shall be designed as 7.5 m wide roads. Roads to navigational and meteorological installations shall be 4 m wide flexible pavements. All service roads shall be designed as flexible pavements. Along the airside/landside perimeter fence a 4 m gravel inspection road shall be constructed.

Related to Airside Service Roads

  • Special Service networks The following services must be received from special service network providers in order to be covered. All terms and conditions outlined in the Summary of Benefits apply.

  • Utility Services Company agrees to pay the full cost and expense associated with its use of all utilities, including but not limited to water, sanitary sewer, electric, storm drainage, and telecommunication services.

  • Dark Fiber Loop 2.8.4.1 Dark Fiber Loop is an unused optical transmission facility, without attached signal regeneration, multiplexing, aggregation or other electronics, from the demarcation point at an End User’s premises to the End User’s serving wire center. Dark Fiber Loops may be strands of optical fiber existing in aerial or underground structure. BellSouth will not provide line terminating elements, regeneration or other electronics necessary for AFN to utilize Dark Fiber Loops.

  • Loop A transmission path that extends from a Main Distribution Frame or functionally comparable piece of equipment in a Customer's serving End Office, to the Rate Demarcation Point (or NID if installed at the Rate Demarcation Point) in or at the Customer's premises. The actual transmission facilities used to provide a Loop may utilize any of several technologies.

  • Call Center Services Answer telephone inquiries during mutually agreed upon hours each day on which the Fund is open for trading. In the event that the Fund plans to be open on a business day when the New York Stock Exchange is to be closed, the Fund shall provide the Transfer Agent with reasonable advance notice and the parties shall discuss the call center resources available for such day. The Transfer Agent shall answer and respond to inquiries from existing Shareholders, prospective Shareholders of the Fund and broker-dealers on behalf of such Shareholders in accordance with the instructions provided by the Fund to the Transfer Agent for purpose of fulfilling its duties under this Agreement, including, accepting transaction requests on behalf of the Fund.

  • Outside Services Consultant shall not use the service of any other person, entity, or organization in the performance of Consultant’s duties without the prior written consent of an officer of the Company. Should the Company consent to the use by Consultant of the services of any other person, entity, or organization, no information regarding the services to be performed under this Agreement shall be disclosed to that person, entity, or organization until such person, entity, or organization has executed an agreement to protect the confidentiality of the Company’s Confidential Information (as defined in Article 5) and the Company’s absolute and complete ownership of all right, title, and interest in the work performed under this Agreement.

  • Ambulance Services Ground Ambulance This plan covers local professional or municipal ground ambulance services when it is medically necessary to use these services, rather than any other form of transportation as required under R.I. General Law § 27-20-55. Examples include but are not limited to the following: • from a hospital to a home, a skilled nursing facility, or a rehabilitation facility after being discharged as an inpatient; • to the closest available hospital emergency room in an emergency situation; or • from a physician’s office to an emergency room. Our allowance for ground ambulance includes the services rendered by an emergency medical technician or paramedic, as well as any drugs, supplies and cardiac monitoring provided. Air and Water Ambulance This plan covers air and water ambulance services when: • the time needed to move a patient by land, or the instability of transportation by land, may threaten a patient’s condition or survival; or • if the proper equipment needed to treat the patient is not available from a ground ambulance. The patient must be transported to the nearest facility where the required services can be performed and the type of physician needed to treat the patient’s condition is available. Our allowance for the air or water ambulance includes the services rendered by an emergency medical technician or paramedic, as well as any drugs, supplies and cardiac monitoring provided.

  • Water Service The Purchase Price for the Property shall include all water rights/water shares, if any, that are the legal source for Seller’s current culinary water service and irrigation water service, if any, to the Property. The water rights/water shares will be conveyed or otherwise transferred to Buyer at Closing by applicable deed or legal instruments. The following water rights/water shares, if applicable, are specifically excluded from this sale:

  • Electric Storage Resources Developer interconnecting an electric storage resource shall establish an operating range in Appendix C of its LGIA that specifies a minimum state of charge and a maximum state of charge between which the electric storage resource will be required to provide primary frequency response consistent with the conditions set forth in Articles 9.5.5, 9.5.5.1, 9.5.5.2, and 9.5.5.3 of this Agreement. Appendix C shall specify whether the operating range is static or dynamic, and shall consider (1) the expected magnitude of frequency deviations in the interconnection; (2) the expected duration that system frequency will remain outside of the deadband parameter in the interconnection; (3) the expected incidence of frequency deviations outside of the deadband parameter in the interconnection; (4) the physical capabilities of the electric storage resource; (5) operational limitations of the electric storage resources due to manufacturer specification; and (6) any other relevant factors agreed to by the NYISO, Connecting Transmission Owner, and Developer. If the operating range is dynamic, then Appendix C must establish how frequently the operating range will be reevaluated and the factors that may be considered during its reevaluation. Developer’s electric storage resource is required to provide timely and sustained primary frequency response consistent with Article 9.5.5.2 of this Agreement when it is online and dispatched to inject electricity to the New York State Transmission System and/or receive electricity from the New York State Transmission System. This excludes circumstances when the electric storage resource is not dispatched to inject electricity to the New York State Transmission System and/or dispatched to receive electricity from the New York State Transmission System. If Developer’s electric storage resource is charging at the time of a frequency deviation outside of its deadband parameter, it is to increase (for over-frequency deviations) or decrease (for under-frequency deviations) the rate at which it is charging in accordance with its droop parameter. Developer’s electric storage resource is not required to change from charging to discharging, or vice versa, unless the response necessitated by the droop and deadband settings requires it to do so and it is technically capable of making such a transition.

  • Configuration Management The Contractor shall maintain a configuration management program, which shall provide for the administrative and functional systems necessary for configuration identification, control, status accounting and reporting, to ensure configuration identity with the UCEU and associated cables produced by the Contractor. The Contractor shall maintain a Contractor approved Configuration Management Plan that complies with ANSI/EIA-649 2011. Notwithstanding ANSI/EIA-649 2011, the Contractor’s configuration management program shall comply with the VLS Configuration Management Plans, TL130-AD-PLN-010-VLS, and shall comply with the following:

Time is Money Join Law Insider Premium to draft better contracts faster.