Common use of Air Emissions Clause in Contracts

Air Emissions. All air emissions permit conditions shall be met during any Test. The Generating Unit(s)’ validated Continuous Emission Monitoring System (“CEMS”) (as such system is defined in South Coast Air Quality Management District’s Regional Clean Air Incentives Market or RECLAIM, Rule 2000(c)(18), as may be amended from time-to-time), shall be the required instrumentation for demonstrating compliance with NOx emissions requirements during the Test for Generating Unit(s) located in the SCAQMD. For Generating Unit(s) located in Air Pollution Control Districts other than the SCAQMD, the preferred instrumentation for demonstrating compliance with NOx emissions requirements during the Test should be installed, maintained and operated in accordance with 40 C.F.R. Part 75 Continuous Emission Monitoring: Subchapter C, Operation and Maintenance Requirements, which includes by reference Appendix A to part 75, Quality Assurance and Quality Control Procedures. For Generating Unit(s) subject to a federal New Source Performance Standard requiring installation of a continuous emission monitoring system (40 C.F.R. Part 60.13 “Monitoring Requirements;” 40 C.F.R. Part 60, Appendix B “Performance Specifications”; and Appendix F “Measurement of Emissions of Other Regulated Pollutants”) must occur during the Tests to demonstrate compliance according to permit conditions for emissions monitoring required by the applicable Air Pollution Control District as stipulated on the Generating Unit(s)’ permit to construct or permit to operate. If the CEMS fails during the Test, temporary, certified emission monitoring equipment may be substituted at SCE’s sole discretion.