Undercoating definition

Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.
Sample 1Sample 2Sample 3
Undercoating means an aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, or firewall of motor vehicles to prevent the formation of rust or to deaden sound.
Sample 1Sample 2Sample 3
Undercoating means an aerosol product designed to impart a protective,
Sample 1Sample 2

Examples of Undercoating in a sentence

  • Undercoating shall cover all areas underside of body and wheel well area to help prevent corrosion under the vehicle.

  • Undercoating shall comply with current Federal and State flammability standards.

  • Undercoating is expected to prevent rust under all bus service conditions for minimum of five years.

  • Undercoating of fenders is recommended for those areas with salt and/or fine gravel or sand.

  • Undercoating compound shall be applied with suitable airless or conventional spray equipment to recommended film thickness and shall show no evidence of voids in cured film.

  • Undercoating shall be applied to a uniform thickness throughout with no bare spots.

  • Undercoating spray operations not con- forming to these provisions are subject to all requirements of this section per- taining to spray finishing operations.

  • Metal lower skirt panels shall be properly coated to resist corrosion (exterior and interior), see Section II., Part M., Undercoating.

  • The container shall not obstruct the aisle of the bus, access to safety equipment or passenger use of the service entrance door.44.4(50) Undercoating.

  • Undercoating: The entire underside of the body, including but not limited to; floor, skirts, wheel housings, sub-floor structure, rear bumper mounting brackets and braces shall be undercoated with rust-proofing material.


More Definitions of Undercoating

Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor
Sample 1

Related to Undercoating

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Nuclear coating means a protective coating formulated and recommended to seal porous surfaces such as steel (or concrete) that otherwise would be subject to intrusions by radioactive materials. These coatings must be resistant to long-term (service life) cumulative radiation exposure [ASTM method D4082], relatively easy to decontaminate, and resistant to various chemicals to which the coatings are likely to be exposed [ASTM method D3912].

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Hood means a respiratory inlet covering that completely covers the head and neck and may also cover portions of the shoulders and torso.