Snow removal equipment definition

Snow removal equipment means any mechanical equipment used for removing snow from land or building surfaces including snow plows, snow blowers, snow sweepers, and any spreader or applicator employed to apply a snow or ice melting product.
Snow removal equipment means any equipment used for removing snow from land or building surfaces including, without limitation, snow plows, blowers, sweepers, and shovels whether operated by mechanical, electrical, or manual means.
Snow removal equipment means rotary plows, graders and loaders with V- plow and/or wing-plow attachments, and such other machinery or equipment as may be engaged in snow removal, and all supporting vehicles contracted or otherwise authorized to remove snow from the county streets or roads.

Examples of Snow removal equipment in a sentence

  • Snow removal equipment operators should monitor appropriate air traffic control (ATC) or other frequencies for information on approaching or departing airplanes.

  • Snow removal equipment operated within the manufacturer’s specifications and in proper operating condition and conduct.

  • Snow removal equipment may instead of oversize load signs and flags, display a lighted, revolving amber light, an amber strobe light, or 2 two-way flashing amber lights at least 4 inches in diameter on the vehicle.

  • A 3” snowfall or Management discretion will initiate the weekend call-ins for snow shoveling.2. Management will monitor progress and will adjust scheduling and duties as needed.3. Ice chipper and plastic shovel will be provided for each building.4. Snow removal equipment cannot be used past 10p.m., shoveling can be done anytime.5. Keep areas shoveled throughout your shift.

  • Snow removal equipment provided the equipment is maintained in good repair so as to minimize noise and that noise discharged from exhausts shall be adequately muffled to prevent loud and/or explosive noises therefrom.(Ord.

  • Note: Snow removal equipment will not perform any winter maintenance operation closer than 10feet (3m) to any aircraft.

  • Snow removal equipment specified in this agreement in good working order, legally registered and inspected, insured, and capable of providing the service requested.

  • Snow removal equipment with plows and cutting edges greater than five (5.0) feet and/or operating weights exceeding six- thousand (6,000) pounds are not permitted to be used in snow and ice responses.

  • His transcendent reality, his objective truth, and godlike existence, which were so bright, fade to nothing in nomen.36 Shakespeare presents King Richard as in semi-reality, a state of amne- sia or twilight sleep: „I had forgot myself.

  • Snow removal equipment will not perform any winter maintenance operation closer than 10feet (3m) to any aircraft.

Related to Snow removal equipment

  • Additional Equipment means equipment that is not factory fitted in the Vehicle, including but not limited to navigation equipment (GPS), baby seat, bicycle rack etcetera;

  • Graffiti remover means a product labeled to remove spray paint, ink, marker, crayon, lipstick, nail polish, or shoe polish, from a variety of noncloth or nonfabric substrates. “Graffiti Remover” does not include “Paint Remover or Stripper,” “Nail Polish Remover,” or “Spot Remover.” Products labeled for dual use as both a paint stripper and graffiti remover are considered “Graffiti Removers.”

  • Control equipment means equipment necessary for the setting and/or unsetting of an immobilizer.

  • Load Control Equipment means the equipment (which may include, but is not limited to, ripple receivers and relays) that is from time to time installed in, over or on Consumer’s Premises for the purpose of receiving signals sent by Load Signalling Equipment and switching on and off, or otherwise controlling, controllable load;

  • School equipment means a durable school-owned machine, equipment, or tool used by a student as part of an activity, course, or program in a secondary school and includes a saw or 3D printer. “School equipment” includes a saw or 3D printer.

  • Standard equipment means the basic configuration of a vehicle which is equipped with all the features that are required under the regulatory acts of the Contracting Party including all features that are fitted without giving rise to any further specifications on configuration or equipment level.

  • Associated equipment means equipment that is used in conjunction with a radiographic exposure device to make radiographic exposures that drives, guides, or comes in contact with the source, e.g., guide tube, control tube, control (drive) cable, removable source stop, “J” tube and collimator when it is used as an exposure head.

  • Terminal Equipment means all telephone instruments, including pay telephone equipment, the common equipment of large and small key and PBX systems and other devices and apparatus, and associated wirings, which are intended to be connected electrically, acoustically or inductively to the telecommunication system of the telephone utility.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Excluded Equipment means, at any date, any equipment or other assets of the Borrower or any Guarantor which is subject to, or secured by, a Capitalized Lease Obligation or a purchase money obligation if and to the extent that (i) a restriction in favor of a Person who is not Holdings or any Restricted Subsidiary of Holdings contained in the agreements or documents granting or governing such Capitalized Lease Obligation or purchase money obligation prohibits, or requires any consent or establishes any other conditions for or would result in the termination of such agreement or document because of an assignment thereof, or a grant of a security interest therein, by the Borrower or any Guarantor and (ii) such restriction relates only to the asset or assets acquired by the Borrower or any Guarantor with the proceeds of such Capitalized Lease Obligation or purchase money obligation and attachments thereto, improvements thereof or substitutions therefor; provided that all proceeds paid or payable to any of the Borrower or any Guarantor from any sale, transfer or assignment or other voluntary or involuntary disposition of such assets and all rights to receive such proceeds shall be included in the Collateral to the extent not otherwise required to be paid to the holder of any Capitalized Lease Obligations or purchase money obligations secured by such assets.

  • Service Equipment means any equipment, Software, systems, cabling and facilities provided by or on behalf of Verizon and used to facilitate provision of the Services at a Customer Site. Ownership of the Service Equipment does not pass to Customer. Service Equipment does not include Verizon Facilities.

  • Existing Equipment means equipment, machines, devices or installations that are in operation prior to September 23, 1970.

  • Farm equipment means equipment used directly for farming

  • Capital Equipment means machinery and equipment purchased or leased, and used in this state by the purchaser or lessee primarily for manufacturing, fabricating, mining, or refining tangible personal property to be sold ultimately at retail if the machinery and equipment are essential to the integrated production process of manufacturing, fabricating, mining, or refining. Capital equipment also includes machinery and equipment used primarily to electronically transmit results retrieved by a customer of an online computerized data retrieval system.

  • Rental Equipment means the equipment identified on the Service Agreement and Order Schedule or otherwise notified to you in writing that we will rent to you as part of our provision of the Services and which you will return to us after expiry or termination of the Agreement, subject to the provisions of this Agreement.

  • Port Cargo Handling Equipment means rubber-tired gantry cranes, straddle carriers, shuttle carriers, and terminal tractors, including yard hostlers and yard tractors that operate within ports.

  • Leased Equipment means the equipment which may include but not limited to modem provided by TM on lease basis to enable usage of the Service by the Customer, as may be decided by TM from time to time at its sole discretion.

  • Metering Equipment means all metering equipment installed at the metering points designated in the appropriate appendix to an Interconnection Service Agreement. Minimum State of Charge:

  • Fixed Equipment means any property affixed in any way to the Licensed Premises existing at the time Notice to Proceed is given, whose removal would damage the Licensed Premises.

  • Operating Equipment means furniture, furnishings, special lighting fixtures, carpeting, draperies, decorations or other special finishing work, signs, appliances and trade fixtures and equipment that is furnished, installed or used by the Contractor in its operations on the Airport. It does not include Fixed Improvements, or repair or maintenance of Operating Equipment or Fixed Improvements or displays or decorations that are of a seasonal or temporary promotional nature.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Replacement Equipment means operational equipment or other parts used by Tenant to replace any of the Equipment.

  • Installation Site means the site at which the Product is originally installed.

  • Replacement Airframe means an Airbus A321 aircraft or a comparable or improved model of Manufacturer (except (a) Engines or engines from time to time installed thereon and any and all Parts related to such Engine or engines and (b) Excluded Equipment), that shall have been made subject to the Lien of the Indenture pursuant to Section 7.05 thereof, together with all Parts relating to such aircraft.

  • New equipment means equipment for which, by the cut-off date, neither of the following events has occurred:

  • Designated Equipment means either: (i) a server identified by serial number, or host I.D. on which the Licensed Materials are stored; or (ii) a computer or workstation, as identified by its serial number, host I.D. number or Ethernet address; to which the Licensed Materials are downloaded and Used only upon the issuance of a License Key. The Designated Equipment shall be of a manufacture, make and model, and have the configuration, capacity (i.e., memory/disk), operating software version level, and pre- requisite and co-requisite applications, prescribed in the Documentation as necessary or desirable for the operation of the Software.