Type D definition

Type D means a School Bus with a Body installed upon a Chassis or unitized type construction, with a GVWR of greater than 16,000 pounds and designed to carry more than 10 persons. If the School Bus includes an internal combustion engine, the engine may be behind the windshield and beside the driver’s seat; it may be at the rear of the bus, behind the rear wheels. The entrance door is ahead of the front wheels.
Type D means a school bus with the engine mounted in the front behind the windshield, midship, or rear. The entrance door is ahead of the front wheels.
Type D. The example uses Activity Code 7 to demonstrate the calculation applicable for any Type D activity code (codes 7, 9, 11 and 13). These codes must be reduced by the Medicaid Eligibility Rate. The example uses a Medicaid Eligibility Rate of 20%. Thus, the gross claim for Activity 7 is equivalent to the product of the reallocated time study percentage times the Medicaid rate times the gross MAC expenditures for Activity Code 7 (20% x 25%x $1000 = $50).

Examples of Type D in a sentence

  • The final surface mix for frontage roads and cross roads shall be Stone Matrix Asphalt (SMA) meeting the requirements of Item 346 when the combined HMA thickness is greater than 6.0 inches, or a regular dense-graded mix Type C or Type D meeting the requirements of Item 341 when the combined HMA thickness used is less than 6.0 inches.

  • STATE has prepared the required Forest Practices Act (FPA) "Written Plan" for operations within 100 feet of Type F or Type D streams.

  • The subject property comprises of a serviced apartment unit identified as Developer’s Parcel No: 33A-03A, Type: D, Storey No. 33A, Sentrio Pandan together with Accessory Parcel No. Two (2) Car Park Bays and bearing postal address of Xxxx Xx. 00X-00X, Xxxxxxx Xxxxxx, Xxxxx 0/00X, Xxxx Xxxxxx, 00000 Xxxxx Xxxxxx.

  • It will include the sampling and testing of 550 tons of Type D asphalt pavement on FM 762.

  • Definitions of Type F, Type D, and Type N streams contained in the Forest Practices Act apply to this contract.


More Definitions of Type D

Type D means a School Bus with a Body installed upon a Chassis or unitized type construction, with the engine mounted in the front or rear with a GVWR of greater than 16,000 pounds and designed to carry more than 10 persons. The engine may be behind the windshield and beside the driver’s seat; it may be at the rear of the bus, behind the rear wheels. The entrance door is ahead of the front wheels.
Type D. Research Program for in vitro testing using cell lines representing common pediatric cancers Research Strategy (in Vivo Testing)
Type D wall system: walls indicated in Shop Area. Glazed aluminum storefront to underside of roof trusses. Powder coat finish. Color(s) to be determined. Approximate quantities based on preliminary planning: storefront 150 LF; glazed swinging doors - 10 nos;
Type D. The software problem constitutes a cosmetic error.
Type D. Women's and girl's (toddler sizes 8.5 - 13 and youth sizes 1 - 6) footwear.
Type D means a School Bus with a Body installed upon a Chassis or unitized type construction, with a GVWR of greater than 16,000 pounds and designed to carry more than 10 persons. If the School Bus includes an internal combustion engine, the engine may be behind the windshield and beside the driver’s seat; it may be at the rear of the bus, behind the rear wheels. The entrance door is ahead of the front wheels. 1.12 APPENDICES AND ATTACHMENTS‌The following appendices and attachments, attached hereto, are hereby expressly made a part of this Solicitation as fully as if set forth at length herein. Appendix AStandard Clauses for NYS Contracts (October 2019)Appendix B – General Specifications (April 2016)Appendix C – Contract Modification ProcedureAppendix D – Federal Funding Agency Mandatory Terms and Conditions (July 2021) Attachment 1 – Specifications and Pricing Attachment 2 – NYS Required Certifications Attachment 3 – Encouraging Use of NYS Businesses Attachment 4 – Insurance RequirementsAttachment 5 – Bidder Information Questionnaire Attachment 6 – Bidder Submission Checklist Attachment 7Bidder Questions Form Attachment 8 – Report of Contract Usage Attachment 9 – Supplier/Manufacturer’s Certificate Attachment 10 - Consortium Bid FormAttachment 11 – Contractor and Reseller/Distributor Information SheetAttachment 12 – EO 16 Certification Form 1.13 CONFLICT OF TERMS‌Conflicts among the documents shall be resolved in the following order of precedence:

Related to Type D

  • type of vehicle with regard to its AECD means vehicles that do not differ in such essential respects as:

  • Type of Work means (insert the type of work you expect to supply the Agency Worker into);

  • Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

  • Category 3 means those affected lands and support facilities if those lands supported operations which were not completed or substantially completed prior to July 1, 1973 (the effective date of the Wyoming Environmental Quality Act) and any affected lands or support facilities taken out of use on or after July 1, 1973 and before May 25, 1975 (the effective date of the Division’s 1975 Rules and Regulations).

  • Multiple Bill/Single Tariff means the billing method used when Switched Exchange Access Services is jointly provided by the Parties. As described in the MECAB document, each Party will render a bill in accordance with its own tariff for that portion of the service it provides. Each Party will bill its own network access service rates.

  • Data Universal Numbering System +4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4- character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

  • Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

  • Uniform Network Code means the uniform network code as defined in Standard Special Condition A11(6) of National Grid’s transporters licence, as such code may be amended from time to time in accordance with the terms thereof.

  • Data Universal Numbering System+4 (DUNS+4) number means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4- character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern.

  • Batch number means a unique numeric or alphanumeric identifier assigned prior to any testing to allow for inventory tracking and traceability.

  • Brand Name or Equal Specification means a specification which uses one or more manufacturer’s names or catalogue numbers to describe the standard of quality, performance, and other characteristics needed to meet District requirements, and which provides for the submission of equivalent products.

  • Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

  • Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

  • product type means any of the following:

  • Motorized bicycle means any vehicle that either has two tandem wheels or one wheel in the front and two wheels in the rear, that is capable of being pedaled, and that is equipped with a helper motor of not more than fifty cubic centimeters piston displacement that produces no more than one brake horsepower and is capable of propelling the vehicle at a speed of no greater than twenty miles per hour on a level surface.