SCF means standard cubic feet.
SCF means standard cubic foot.
SCF when applied to Gas means the volume of Gas that occupies one (1) cubic foot of space measured dry under an absolute pressure of fourteen point six nine six (14.696) pounds per square inch and a temperature of sixty
Examples of SCF in a sentence
Southcentral Foundation (SCF) is an Alaska Native-owned, nonprofit health care organization serving nearly 65,000 Alaska Native and American Indian people living in Anchorage, Matanuska-Susitna Valley and 60 rural villages in the Anchorage Service Unit.
Neither Contractor nor any Party employed by the Contractor will be deemed for any purpose to be an employee, agent, servant or representative of SCF.
Therefore, payments made to Contractor by SCF will not be eligible for unemployment compensation or other similar benefits.
This RFP does not obligate SCF or the selected Bidder until a contract is signed and approved by both parties.
As an independent Contractor, Contractor is not an employee of SCF.
More Definitions of SCF
SCF or “standard cubic foot of gas” shall mean the amount of Gas necessary to fill a cubic foot of space when the Gas is at a pressure of 14.65 pounds per square inch absolute and a temperature of 60 degrees Fahrenheit.
SCF means SCF-VII, L.P., a Delaware limited partnership.
SCF means satellite control facility.
SCF where “SCF” means the quantity of dry ideal Gas, at a temperature of sixty degrees Fahrenheit (60°F) and a pressure of fourteen decimal six nine six (14.696) pounds per square inch, contained in a volume of one (1) cubic foot, and “MMscfd” means MMscf per day.
SCF means standard cubic foot of Gas;
SCF means standard cubic foot of Gas.
SCF means standard cubic feet at 60°F and at atmospheric pressure equal to 29.92 inches of mercury absolute, measured by standard sharp edge orifice plate and differential pressure transmitters located at the Fertilizer Plant. The measured flow shall be pressure and temperature compensated and totalized by the Fertilizer Plant’s Honeywell process control computer (TDC 3000) or any replacement computer. All transmitter signals and computer calculations are available to the Refinery through the existing communications bus for verification. Calibration of the transmitters shall be done at least annually and may be done more frequently at Refinery Company’s request.