Regenerative braking definition

Regenerative braking means the partial recovery of the energy normally dissipated into friction braking that is returned as electrical current to an energy storage device.
Sample 1Sample 2Sample 3
Regenerative braking means the decelerating of the vehicle when the vehicle energy management system diverts part of the kinetic energy at the wheel to charge the rechargeable energy storage system (REESS).
Sample 1
Regenerative braking means the decelerating of the vehicle when the battery management system diverts part of the kinetic energy at the wheel to charge the battery pack or drive batteries.
Sample 1

Examples of Regenerative braking in a sentence

  • Regenerative braking systems may be utilized during the range test.

  • Similarly, Massachusetts law requires that inactive voters be asked for ID.

  • Regenerative braking in the MINI E is integrated with the accelerator pedal, effectively allowing the driver to drive the car with one pedal; the car brakes when the driver releases pressure on the accelerator pedal (Vilimek et al., 2012).

  • Regenerative braking shall be additionally increased as the brake pedal is applied.

  • This specification covers the design, manufacture, installation, testing commissioning & field trial of Re-generative braking feature developed in existing 5000 HP, 25 KV, 50 Hz tap changer control WAG7 electric locomotives.

  • Regenerative braking In the following situations, kinetic energy is converted to electric energy and deceleration force can be obtained in conjunction with the recharging of the hybrid battery (traction bat- tery).

  • With line voltage of 22.5 KV AC and half-worn wheels and axle load of 20.5 t, the WAG7 locomotive shall be capable of the following performance: Regenerative braking: effort requirement25% of gross weight over the speed range of 10 kmph to 65 kmph without slipping, and as limited by adhesion for higherspeeds.

  • Regenerative braking is another way of reducing the energy consumption of vehicles and recovering energy that would normally be wasted as heat.

  • Regenerative braking could potentially be utilized to recharge the batteries, however, from the available information the Green Goats were not built with this technology.

  • Regenerative braking should not adversely impact the vehicle’s braking ability on varying road surfaces.

Related to Regenerative braking

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Cannabis processing facility means a person that:

  • Cannabis testing facility means an entity registered by

  • Ambulatory surgical facility means a facility that:  Is licensed by the state where it is located.  Is equipped and operated mainly to provide for surgeries or obstetrical deliveries.  Allows patients to leave the facility the same day the surgery or delivery occurs.

  • cogeneration means the simultaneous generation in one process of thermal energy and electrical or mechanical energy;

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • Cogeneration facility means a power plant in which the heat or steam is also used for industrial or commercial heating or cooling purposes and that meets Federal Energy Regulatory Commission standards for qualifying facilities under the Public Utility Regulatory Policies Act of 1978 (16

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Electric generation service means the provision of retail

  • Valve means a device used to control the flow of water in the irrigation system.

  • Clean coal SNG facility means a facility that uses a

  • Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion."

  • Modular home means a modular unit as defined in Section 15A-1-302.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Train Unloading Infrastructure means train unloading infrastructure reasonably required for the unloading of iron ore from the Railway to be processed, or blended with other iron ore, at processing or blending facilities in the vicinity of that train unloading infrastructure and with the resulting iron ore products then loaded on to the Railway for transport (directly or indirectly) to a loading port. Company to obtain prior Ministerial in-principle approval

  • Gantry means that part of a radiation therapy system supporting and allowing movements of the radiation head about a center of rotation.

  • Cannabis cultivation facility means a person that:

  • Fabrication means making up data or results and recording or reporting them.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Marijuana testing facility means an entity licensed to analyze and certify the safety and potency of marijuana.

  • Service Component means certain enabling Software, hardware peripherals and associated documentation which may be separately provided by Symantec as an incidental part of a Service.