Reactive inspections definition

Reactive inspections means inspections that are initiated in reaction to a specific report or complaint. In these circumstances, the EMI is required to conduct a site visit to verify the facts alleged in the complaint; and assess the level of non-compliance.
Sample 1Sample 2Sample 3

Examples of Reactive inspections in a sentence

  • Reactive inspections may arise following an accident, incident or complaint.

  • Reactive inspections of any type of licensee where one or more specialists are needed on the team (of three or more inspectors).

  • Reactive inspections are typically performed in response to a specific problem identified by any group within the NRC (e.g., including headquarters, the regional offices), or in response to allegations or other identified problems (e.g., 10 CFR Part 21 or 10 CFR 50.55(e) reports) from outside sources.

  • Reactive inspections may focus on one or several issues, and need not examine the rest of a licensee's program.

  • Reactive inspections verify that vendors of basic components have developed and implemented adequate procedures and controls to evaluate and correct conditions adverse to quality.

  • Reactive inspections are carried out as a result of third party defect reports.

  • Reactive inspections are performed in response to a report about the condition of a road, or a report of injury and/or property damage to a member of the public.

  • Reactive inspections are typically performed in response to a specific problem identified by any group within the NRC (e.g., including headquarters, the regional offices, etc.), or in response to allegations or other identified problems (e.g., 10 CFR Part 21 or 10 CFR 50.55(e) reports) from outside sources.

  • Reactive inspections include follow-up for events through additional inspections, Special Inspection Teams (SITs), Augmented Inspection Teams (AITs), and Incident Investigation Teams (IITs).

  • Reactive inspections are conducted in response to allegations, previous inspection findings, reports in accordance with 10 CFR Part 21 and/or 10 CFR 50.55(e), and other information sources indicating the possibility that NRC requirements are not being met.

Related to Reactive inspections

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Sampling means the distribution of samples to members of the general public in a public place.

  • Active Ingredient means any com- ponent that is intended to furnish pharmacological activity or other di- rect effect in the diagnosis, cure, miti- gation, treatment, or prevention of dis- ease, or to affect the structure or any function of the body of humans. The term includes those components that may undergo chemical change in the manufacture of the drug product and be present in the drug product in a modified form intended to furnish the specified activity or effect.

  • Invasive species means an alien species whose introduction does or is likely to cause economic or environmental harm or harm to human health.

  • Subsurface tracer study means the release of a substance tagged with radioactive material for the purpose of tracing the movement or position of the tagged substance in the well-bore or adjacent formation.

  • Aquatic invasive species means any invasive, prohibited,

  • Samples mean representative physical examples of materials, equipment or workmanship, used to confirm compliance with requirements and/or to establish standards for use in execution of the Work.

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • Site means the place or places where the permanent Works are to be carried out including workshops where the same is being prepared.

  • Decontamination means a process that attempts to remove or reduce to an acceptable level a contaminant exceeding an allowable threshold set forth in these Rules in a harvest batch or production batch.

  • Invasive plant species means species of plants not historically found in California that spread outside cultivated areas and can damage environmental or economic resources. Invasive species may be regulated by county agricultural agencies as noxious species. Lists of invasive plants are maintained at the California Invasive Plant Inventory and USDA invasive and noxious weeds database.

  • Radioactive marker means radioactive material placed subsurface or on a structure intended for subsurface use for the purpose of depth determination or direction orientation.

  • Inspections has the meaning set forth in Section 4.1.2.

  • Airborne radioactivity area means a room, enclosure, or area in which airborne radioactive materials, composed wholly or partly of licensed material, exist in concentrations:

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Contamination means the presence of, or Release on, under, from or to the environment of any Hazardous Substance, except the routine storage and use of Hazardous Substances from time to time in the ordinary course of business, in compliance with Environmental Laws and with good commercial practice.

  • Onsite means within the Prescribed Premises boundary.

  • Radioactive material means any solid, liquid, or gas which emits radiation spontaneously.

  • Acute toxicity means concurrent and delayed adverse effects that result from an acute exposure and occur within any short observation period, which begins when the exposure begins, may extend beyond the exposure period, and usually does not constitute a substantial portion of the life span of the organism.

  • Airborne radioactive material means any radioactive material dispersed in the air in the form of dusts, fumes, particulates, mists, vapors, or gases.

  • Hazardous Materials Contamination means contamination (whether now existing or hereafter occurring) of the improvements, buildings, facilities, personalty, soil, groundwater, air or other elements on or of the relevant property by Hazardous Materials, or any derivatives thereof, or on or of any other property as a result of Hazardous Materials, or any derivatives thereof, generated on, emanating from or disposed of in connection with the relevant property.