Maintenance projects definition

Maintenance projects means those activities, materials, labor and contracts necessary to replace, restore, refurbish or enhance real property which do not alter the architectural or engineering characteristics of the structure, as follows: painting; window repair and replacement; roof repair and replacement; repointing and masonry repair; downspout and gutters; landscaping; roadways, parking facilities, track and athletic court resurfacing and reconstruction; sidewalk and curbing reconstruction and replacement; asbestos abatement (in accordance with all State and Federal statutes and regulations); caulking and insulation; and replacement, reconstruction and construction of non-load bearing interior walls. No such project shall affect the structural integrity of any existing facility or utility system.
Sample 1Sample 2
Maintenance projects means those activities,
Sample 1Sample 2Sample 3
Maintenance projects means projects that include, but are not limited to, pavement repairs, tree trimming, bridge maintenance, and pavement restriping and roadway reconstruction which do not add new lanes.
Sample 1Sample 2Sample 3

Examples of Maintenance projects in a sentence

  • Maintenance projects require a mutually acceptable method to resolve the problems which arise when incompatible situations arise between drawings and specifications and actual conditions on the ground to allow orderly and satisfactory progress of the maintenance.

  • University of California typically requires that prevailing wages be paid on all Public Works Maintenance projects in excess of $1,000.

  • All MVC Scheduled Maintenance projects will be complete when the two Elevator Modernization projects are done.

  • Projects which do not require the establishment of horizontal and vertical control, such as Safety Improvements, Maintenance projects, Guide Rail Installations, and Street Intersection Improvement, are not required to meet the N.J. State Plane Coordinate System standards.

  • Typical Recurring Maintenance projects include, but are not limited to painting, pump and motor replacement, cleaning, repair and replacement of lighting, engine overhaul, replacement of carpeting, and refinishing hardwood floors.

  • Maintenance projects that do not extend the useful life or increase the capacity of the building are expensed, such as painting and plumbing repairs.

  • For Maintenance projects, the Contractor and Project EDA are considered independent of one another.

  • Maintenance projects require a mutually acceptable method to resolve the problems, which arise when incompatible situations arise between drawings and specifications and actual conditions on the ground to allow orderly and satisfactory progress of the maintenance.

  • Maintenance projects are permitted to have Project Only EDA of 5 acres or less without requiring an SWPPP, NOI, NOT.

  • Maintenance Engineering is responsible for storm damage restoration, Day Labor project coordination, field engineering support, design of Major Maintenance projects, coordination between Maintenance and other programs, and all other engineering functions as required.

Related to Maintenance projects

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under §175A of the CAA, as amended.

  • Maintenance Program means a maintenance program for the Aircraft approved by the Aviation Authority, in conformity with the Maintenance Planning Document.

  • Maintenance Programme shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause 14.2;

  • Maintenance work means the repair of existing facilities when the size, type or extent of such facilities is not thereby changed or increased. While “maintenance” includes painting and decorating and is covered under the law, it does not include work such as routine landscape maintenance or janitorial services.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production. Manual Load Dump Action:

  • Project means the goods or Services described in the Signature Document or a Work Order of this Contract.

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • The Project means supply, installation, testing and commissioning, integration of computer hardware and services with support under Warranty and annual maintenance contract, if required for the contract period.

  • Maintenance Outage means NERC Event Type MO, as set forth in attached Exhibit B, and includes any outage involving ten percent (10%) of the Facility’s Net Output that is not a Forced Outage or a Planned Outage.

  • Maintenance Plan means a maintenance plan pursuant to N.J.A.C. 7:8-5.2(b) and 5.8 prepared by the design engineer for the stormwater management measures incorporated into the design of a major development.

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • Project Water means water made available for delivery to the contractors by project conservation facilities and the transportation facilities included in the System.

  • Maintenance and Operations Revenue or “M&O Revenue” means (i) those revenues which the District receives from the levy of its annual ad valorem maintenance and operations tax pursuant to Section 45.002 of the TEXAS EDUCATION CODE, or other lawful authority, and Article VII § 3 of the TEXAS CONSTITUTION, plus (ii) all State revenues to which the District is or may be entitled under the applicable provisions of the TEXAS EDUCATION CODE or any other statutory provision as well as any amendment or successor statute to these provisions, as applicable, less

  • Projects means the projects identified in Exhibit A to the Agreement and all other projects, any costs of which are included in a Transitional Capital Plan pursuant to the Act or are Recovery Costs, and financed, by payment or reimbursement, with the proceeds of Bonds or Notes.

  • Routine maintenance means activities to keep an impervious surface as near as possible to its constructed condition. This includes ordinary maintenance activities, resurfacing paved areas, and exterior building changes or improvements which do not materially increase or concentrate stormwater runoff, or cause additional nonpoint source pollution.

  • The Works/Project means the works to be executed or done under this contract.

  • Maintenance Schedule means a document which describes the specific scheduled maintenance tasks and their frequency of completion necessary for the safe operation of those aircraft to which it applies;

  • Furniture maintenance product means a wax, polish, conditioner, or any other product designed for the purpose of polishing, protecting or enhancing finished wood surfaces other than floors. “Furniture Maintenance Product” does not include dusting aids, products designed solely for the purpose of cleaning, and products designed to leave a permanent finish such as stains, sanding sealers and lacquers.

  • Maintenance Costs means parts and materials, sublet and labour costs of a qualified licensed mechanic for the maintenance of the Revenue Service Vehicles, but shall not include costs associated with interior and exterior transit advertising signs and non-mechanical servicing of Revenue Service Vehicles such as fuelling, clearing fareboxes, cleaning and painting wheel rims, vehicle washing and other work performed by a serviceman; and,

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Ongoing Project means a multi-year project undertaken by a Company in fulfilment of its CSR obligation having timelines not exceeding three years excluding the financial year in which it was commenced, and shall include such project that was initially not approved as a multi-year project but whose duration has been extended beyond one year by the board based on reasonable justification;

  • Maintenance and Support means updates, upgrades, patches, fixes, etc. and technical support provided for the Products and Services that Supplier is required to provide directly to DXC or a DXC Customer.

  • Construction project means the same as that term is defined in Section 38-1a-102.

  • The Project Plan means the document to be developed by the Supplier and approved by the Purchaser, pursuant to GCC Clause 19, based on the requirements of the Contract and the Preliminary Project Plan included in the Supplier’s bid. The “Agreed and Finalized Project Plan” is the version of the Project Plan approved by the Purchaser, in accordance with GCC Clause 19.2. Should the Project Plan conflict with the Contract in any way, the relevant provisions of the Contract, including any amendments, shall prevail.

  • Preventative Maintenance means the routine, customary or regular course of procedure related to the care or upkeep of an existing Department facility or system, which may also include inspection services provided as part of a preventative maintenance program. Preventive maintenance is conducted to keep equipment working and/or extend the life of the equipment.