Fails to Return to Work means, in relation to a member who, having commencedMPA leave, subsequently either:
Fails to Return to Work means, in relation to a member who, having commenced
Base Year Value means the assessed value of eligible property January 1 preceding the execution of the agreement plus the agreed upon value of eligible property improvements made after January 1 but before the execution of the agreement.
Erroneous Payment Return Deficiency has the meaning assigned to it in Section 14.14(d).
the specified year means the school year beginning at or about the beginning of September 2023;
One-hundred-year flood means a flood having a one per cent chance of being equaled or exceeded in any given year.
Appropriate List Matching Data means (A) account registration and alternate payee data, to the extent made appropriate by statutes, rules or regulations governing the U.S. Government Lists, (ii) data determined by BNYM in light of statutes, rules or regulations governing the U.S. Government Lists to be necessary to provide the services described in this Section 3(b)(5), and (iii) data the parties agree in writing to be necessary to provide the services described in this Section 3(b)(5).
Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.
Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.
Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.
proof of B-BBEE status level of contributor means:B-BBEE Status level certificate issued by an authorized body or person;A sworn affidavit as prescribed by the B-BBEE Codes of Good Practice;Any other requirement prescribed in terms of the B-BBEE Act;
Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.
Minimum Quarterly Distribution means $0.35 per Unit per Quarter (or with respect to the period commencing on the Closing Date and ending on September 30, 2005, it means the product of $0.35 multiplied by a fraction of which the numerator is the number of days in such period and of which the denominator is 92), subject to adjustment in accordance with Section 6.6 and Section 6.9.
Locational Deliverability Area Reliability Requirement means the projected internal capacity in the Locational Deliverability Area plus the Capacity Emergency Transfer Objective for the Delivery Year, as determined by the Office of the Interconnection in connection with preparation of the Regional Transmission Expansion Plan, less the minimum internal resources required for all FRR Entities in such Locational Deliverability Area.
Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.
task-based work means work in which a worker is paid a fixed rate for performing a task;
Quarterly Distribution means with respect to each Distribution Date, the distribution to be made to the Holders of the Up-MACRO Tradeable Shares that are Outstanding on the Distribution Date pursuant to Section 5.2(a).
Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.
Limited Demand Resource Reliability Target for the PJM Region or an LDA, shall mean the maximum amount of Limited Demand Resources determined by PJM to be consistent with the maintenance of reliability, stated in Unforced Capacity that shall be used to calculate the Minimum Extended Summer Demand Resource Requirement for Delivery Years through May 31, 2017 and the Limited Resource Constraint for the 2017/2018 and 2018/2019 Delivery Years for the PJM Region or such LDA. As more fully set forth in the PJM Manuals, PJM calculates the Limited Demand Resource Reliability Target by first: i) testing the effects of the ten- interruption requirement by comparing possible loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using the cumulative capacity distributions employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) more than ten times over those peak days; ii) testing the six-hour duration requirement by calculating the MW difference between the highest hourly unrestricted peak load and seventh highest hourly unrestricted peak load on certain high peak load days (e.g., the annual peak, loads above the weather normalized peak, or days where load management was called) in recent years, then dividing those loads by the forecast peak for those years and averaging the result; and (iii) (for the 2016/2017 and 2017/2018 Delivery Years) testing the effects of the six-hour duration requirement by comparing possible hourly loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using a Monte Carlo model of hourly capacity levels that is consistent with the capacity model employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) for more than six hours over any one or more of the tested peak days. Second, PJM adopts the lowest result from these three tests as the Limited Demand Resource Reliability Target. The Limited Demand Resource Reliability Target shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the DR Factor] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].
First Target Distribution means $0.4025 per Unit per Quarter (or, with respect to the period commencing on the Closing Date and ending on September 30, 2005, it means the product of $0.4025 multiplied by a fraction of which the numerator is the number of days in such period, and of which the denominator is 92), subject to adjustment in accordance with Section 6.6 and Section 6.9.
Silicone-based Multi-purpose Lubricant means any lubricant which is:
Third Target Distribution means $0.5250 per Unit per Quarter (or, with respect to the period commencing on the Closing Date and ending on September 30, 2005, it means the product of $0.5250 multiplied by a fraction of which the numerator is equal to the number of days in such period and of which the denominator is 92), subject to adjustment in accordance with Section 6.6 and Section 6.9.
Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.
Allowable emissions means the emission rate of a stationary source calculated using both the maximum rated capacity of the source, unless the source is subject to federally enforceable limits which restrict the operating rate or hours of operation, and the most stringent of the following:
Allowable Expense means a necessary, reasonable and customary item of expense for health care, which is: • covered at least in part under one or more plans covering the person for whom the claim is made; and • incurred while this plan is in force. When a plan provides healthcare coverage in the form of services, the reasonable cash value of each service is considered as both an allowable expense and a benefit paid. Vision care services covered under other plans are not considered an allowable expense under this plan. PLAN means any of the following that provides benefits or services for medical, pharmacy, or dental care treatment. If separate contracts are used to provide coordinated coverage for members of a group, the separate contracts are considered parts of the same plan and there is no COB among those separate contracts.
Eligible Expense means the lesser of the reasonable, customary, usual, fair market value charge for a covered service or the provider's actual charge.
Second Target Distribution means $0.4375 per Unit per Quarter (or, with respect to the period commencing on the Closing Date and ending on September 30, 2005, it means the product of $0.4375 multiplied by a fraction of which the numerator is equal to the number of days in such period and of which the denominator is 92), subject to adjustment in accordance with Section 6.6 and Section 6.9.
Statewide special election means a special election called by the governor or the