Engineering plan definition

Engineering plan means the plans and specifications for the works to be constructed or purchased within any subdistrict, including such maps, profiles, plans and other data as may be necessary to set forth the location, character of the work, the property benefited, taken or damaged, showing any and all rights of way or other property which may be required for the construction of any works, together with the estimates of the cost of the works and an estimate of the benefits and damages which will accrue to each tract of land within a subdistrict upon the construction or purchase of the works. A project work plan prepared for a subdistrict in cooperation with a soil and water conservation district may be adopted as the engineering plan, even though such project work plan is not the final construction plan, and does not give an estimate of the benefits and damages which will accrue to each tract.
Sample 1Sample 2Sample 3
Engineering plan. ’ - means a plan indicating details of subdivision earthworks, road and drainage works, stormwater treatment measures, stormwater on-site detention or interallotment drainage works as required for an Engineering Construction Certificate, Roads Act 1993 or Local Government Act 1993, prepared in accordance with the requirements of Council’s ‘‘Engineering Guide for Development’’.
Sample 1Sample 2Sample 3
Engineering plan. An engineering plan submitted by the Licensee in the Tender, including any change introduced therein with the approval of the Director and attached to the license as Appendix B;
Sample 1Sample 2

Examples of Engineering plan in a sentence

  • The Project Engineering Plan will provide a summary of the procedures, plans, and execution methodologies to be used by Contractor to develop the engineering design in accordance with the Applicable Codes and Standards and the requirements of the Agreement.

  • With respect to plans that Contractor is required to develop under Attachment A (e.g. Project Execution Plan, Project Engineering Plan, etc.), Contractor may update or deviate from such plans without Owner’s approval (except for those plans under Attachment A that are subject to the Owner’s approval (as specified under Attachment A or Attachment B), then, with respect to those plans, revisions are subject to Owner’s approval rights as may be prescribed in Attachment A or Attachment B).

  • The Owner must notify the Vendor of desired coverage areas, RF Engineering parameters or other information or restrictions the Owner wishes to be included in the Final RF Engineering Plan for each PCS System and/or PCS Sub-System.

  • Subject to subsection 7.2 and to subsection 2.6 and the determination of the Final Site Count and the delivery of the Final RF Engineering Plan for each PCS System and PCS Sub-System, the Parties understand that the quantities of Products and Services identified on Schedules 2 and 3 which are necessary for the build-out by the Vendor of the Initial System pursuant to the terms and conditions of this Contract constitute the Owner's initial purchase commitment under this Contract (the "Initial Commitment").

  • The Project Engineering Plan will provide a summary of the plans, and execution methodologies to be used by Contractor to develop the engineering design in accordance with the Applicable Codes and Standards and the requirements of the Agreement.

  • Should the Licensee realize, during the establishment of the MRT System, that there is a need to deviate from the Engineering Plan, the Licensee will approach the Director in writing in order to receive the latter’s approval to the change in the plan; in its approach, the Licensee will specify in detail the substance and nature of the requested change and the reasons for it; the Licensee will append to the request the revised plan that it proposes.

  • The rate of establishment of the MRT System, the milestones for its establishment and the date of the commencement of service provision in the various regions of the State, will be in accordance with the timetable set out in the Engineering Plan - Appendix B of the Second Annex to the License.

  • Contractor, on behalf of Owner shall apply for and obtain all necessary Authorizations for the construction and operation of the Facility that are identified by Government Authorities as being required for the Facility, based upon the submitted Engineering Plan for the Facility.

  • The Licensee is responsible for ensuring that equipment installed in the MRT System meets at least the condition of technical compatibility to the properties specified in the manufacturer’s specifications relevant to the same equipment item, that were appended to the Engineering Plan.

  • Master Project Schedule - Schedule for the functional service areas - Charts that reflect progress against plan - Weekly status reports, which could include: RF Plan, Site Acquisition Plan, Spectrum Clearance Plan, Microwave Facilities - Design Activities, Microwave Facilities - Detailed Engineering Plan, Site Construction, Network Design Plan, Cell Engineering Plan, Switch Engineering Plan, Cell Plan, Optimization Plan.


More Definitions of Engineering plan

Engineering plan means the plans and specifications for the works to be constructed including:
Sample 1Sample 2Sample 3
Engineering plan means the plans and specifications for the works to be con- structed including:
Sample 1Sample 2
Engineering plan means the engineering plan for the Facility, which engineering plan is filed with the DNR in accordance with Wis. Stat. § 196.491 (3)(a)3.a.
Sample 1
Engineering plan means the plans and specifications (including mechanical, electrical and structural working drawings) for the supply, installation, and finishing in the Premises, or in the adjacent shell and core areas of the Building, of wiring, lights and switches, heating, ventilation and cooling equipment and controls, telephone and electrical outlets, plumbing and fixtures, fire protection, fire warning and security systems, and other mechanical, electrical and structural requirements, equipment and facilities not included in the Construction Plan which are attached to and form part of, and are necessary for the use and operation of, the Premises. The Engineering Plans are to be prepared by Tenant's Engineer at Tenant's expense.
Sample 1
Engineering plan. - means a plan indicating details of subdivision earthworks, road and drainage works, stormwater treatment measures, stormwater
Sample 1

Related to Engineering plan

  • Mining Plan means a mining plan drawn in accordance with clause (b) of sub-section

  • Project Implementation Plan means the detail plan submitted by the Developer with regard to development of Project Facilities and its operation and management thereof in accordance with this Agreement and to be appended as Schedule 9 to this Agreement.

  • Training Plan means the plan that outlines what training and assessment will be conducted off-the-job and what will be conducted on-the-job and how the Registered Training Organisation will assist in ensuring the integrity of both aspects of the training and assessment process.

  • service delivery and budget implementation plan means a detailed plan approved by the executive mayor of a municipality in terms of section 53(l)(c)(ii) of the MFMA for implementing the municipality's delivery of municipal services and its annual budget, and which must indicate

  • engineering services means infrastructure for –

  • Decommissioning Plan means the document containing detailed information on the proposed decommissioning and covering the following: the selected decommissioning strategy; the schedule, type and sequence of decommissioning activities; the waste management strategy applied, including clearance; the proposed end state; the storage and disposal of the waste from decommissioning; the timeframe for decommissioning; the cost estimates for the completion of decommissioning; and the objectives, expected results, milestones, target dates, as well as the corresponding key performance indicators, including, as appropriate, earned value based indicators. The plan is prepared by the nuclear facility license holder and is reflected in the multiannual work programmes of the Programme;

  • Initial Engineering Report means the engineering report concerning Oil and Gas Properties of Loan Parties dated as of June 30, 2006 prepared by Netherland, Xxxxxx & Associates and XxXxxxxx & XxxXxxxxxxx.

  • Operating Plan means a plan adopted or amended under this section for the development, redevelopment, maintenance, operation and promotion of a business improvement district, including all of the following:

  • Improvement Plan means the plan required by the Authority from the Supplier which shall detail how the Supplier will improve the provision of the Goods and/or Services pursuant to Clause 29.1.1 (Authority Remedies);

  • external engineering service means an engineering service situated outside the boundaries of a land area and that is necessary to serve the use and development of the land area;

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • Redevelopment Plan means the “Lincoln Center Redevelopment Plan” passed, adopted and approved by the City pursuant to the Resolution, and shall include any amendment of said Redevelopment Plan heretofore or hereafter made by the City pursuant to law.

  • Development Plan has the meaning set forth in Section 3.2.

  • Marketing Plan means a plan or system concerning a material aspect of conducting business. Indicia of a marketing plan include any of the following:

  • Geotechnical engineer means a professional engineer registered with the Association of Professional Engineers, Geologists, and Geophysicists of the Northwest Territories and whose principal field of specialization is the design and construction of earthworks in a permafrost environment;

  • Numbering Plan Area (NPA) , also called area code, means the three (3)-digit code that occupies the A, B, C positions in the ten (10)-digit NANP format that applies throughout the NANP Area. NPAs are of the form NXX, where N represents the digits two (2) through nine (9) and X represents any digit zero (0) through nine (9). In the NANP, NPAs are classified as either geographic or non-geographic. Geographic NPAs are NPAs which correspond to discrete geographic areas within the NANP Area. Non-geographic NPAs are NPAs that do not correspond to discrete geographic areas, but which are instead assigned for services with attributes, functionalities, or requirements that transcend specific geographic boundaries. For example, NPAs in the N00 format, (e.g., 800, 900) are non- geographic.

  • site development plan means a dimensioned plan drawn to scale that indicates details of the proposed land development, including the site layout, positioning of buildings and structures, property access, building designs and landscaping;

  • Numbering Plan Area (“NPA”) (sometimes referred to as an area code) is the three- digit indicator which is designated by the first three digits of each 10-digit telephone number within the NANP. Each NPA contains 800 possible NXX Codes. There are two general categories of NPA, “Geographic NPAs” and “Non-Geographic NPAs.” A “Geographic NPA” is associated with a defined geographic area, and all telephone numbers bearing such NPA are associated with services provided within that geographic area. A “Non-Geographic NPA,” also known as a “Service Access Code (SAC Code)” is typically associated with a specialized Telecommunications Service which may be provided across multiple geographic NPA areas; 500, 800, 900, 700, and 888 are examples of Non-Geographic NPAs.

  • Engineering Report means either an Independent Engineering Report or an Internal Engineering Report.

  • Work Plan means a plan that describes each individual activity to be conducted to complete eligible activities and the associated costs of each individual activity.

  • Project Plan means the document to be developed by the Contractor and approved by Webel Technology Ltd., based on the requirements of the Contract and the Preliminary Project Plan included in the Contractor’s bid. For the sake of clarity, the Agreed and Finalized Project Plan” refers to the version of the Project Plan submitted by the contractor after receiving the letter of Award and the same approved by Webel Technology Ltd. The project plan may be changed/ modified during the course of the project. Should the Project Plan conflict with the provisions of the Contract in any way, the relevant provisions of the Contract, including any amendments, shall prevail.

  • Procurement Plan means the Recipient’s procurement plan for the Project, dated April 2, 2010, and referred to in paragraph 1.16 of the Procurement Guidelines and paragraph 1.24 of the Consultant Guidelines, as the same shall be updated from time to time in accordance with the provisions of said paragraphs.

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Project Implementation means all steps which the Grantee undertakes in order to deliver the Project which is being supported by funding provided under this Grant Contract. Any reference to UK primary legislation (Acts) or secondary legislation (Statutory Instruments) in this Grant Contract includes reference to any changes to or replacement of those Acts or Statutory Instruments.

  • Good Engineering Practice means, Works carried out in accordance with the following standards/ specifications,

  • Engineering control means the use of substitution, isolation, ventilation, and equipment modification to reduce exposure to SARS-CoV-2 virus and COVID-19 disease related workplace hazards and job tasks.