SAFETY HARNESS Sample Clauses

SAFETY HARNESS. The Employer shall supply where required a full body harness at no cost to the employee. The Employee however will sign for and be responsible for the harness and return it in good condition to the employer when no longer required. If not returned the employer may deduct the cost from the employee’s final pay.
AutoNDA by SimpleDocs
SAFETY HARNESS. When the Employer furnished the Employee with a Safety Harness to wear, where required on certain jobs, the Employee becomes responsible for that item. If the item is lost or stolen while in the Employee’s possession, the Employee agrees to replace the item. Exceptions will be normal wear and tear to the safety item.
SAFETY HARNESS. (i) Access to Toxic Gas Monitor
SAFETY HARNESS. Safety harnesses may be used to provide protection against a fatal or serious fall when a scaffolder is required to work over a void, or lean out from the scaffold or supporting structure without the protection of a guardrail; however, they can increase the risk of injury if used incorrectly or unnecessarily. Safety harnesses can be used during: • The erection and dismantling of hung scaffolds prior to or upon removal of the platform. Licensed to Linc Scaffolding on 19-Jul-2017. 1 user personal license only. Copying, copy/pasting, storage & distribution or use on network prohibited. Get permission to copy from or network this publication xxx.xxxxxxxxx.xxx/xxxxxxxxx • The fixing and removal of trolley tracks on suspension rigs. • The attachment and removal of spurs projecting from the supporting structure. • The erection and dismantling of cantilever scaffolds prior to or upon removal of the initial platform. Safety harnesses and lanyards should comply with, be inspected in accordance with and be used in compliance with the relevant requirements of AS 1891, 2626, NZS 5811.1, NZS 5811.2 and the suppliers’ information. The inspection check list in AS 2626 is re- produced in Appendix G. Anchorage points should have a working load limit of not less than 1500 kg and be located above or directly behind the scaffolder. Inertia reels should be used where vertical mobility is needed. The inspection check list in AS 2626 is reproduced in Appendix H.

Related to SAFETY HARNESS

  • Safety Glasses 10.3.1 Where a teacher is considered to be working in an “eye danger” area, the teacher shall receive a personal issue of standard neutral safety glasses which shall remain the property of the employer.

  • SAFETY & HEALTH The Employer and the IBTCoalition agree that the safety of employees and the general public is of utmost importance. Therefore, the Employer shall provide a safe work environment that is free of recognized hazards that could cause death, injury or illness.

  • Safety Boots Each employee, after 3 months’ continuous service, will be reimbursed (on production of a receipt), the cost of one pair of safety boots (approved by the employer), in each year, to a maximum of $110.00. Wet Weather All protective clothing such as wet weather jackets, safety helmets, welding jackets, welding xxxxxxx, welding gauntlets, rubber boots, etc, (which remain the property of the Company), will be supplied on all occasions deemed necessary.

  • Safety Orientation All employees shall be certified in Safety Orientation. Safety Orientation shall consist of three parts: PART 1 - the CODC Interactive Rights and Responsibilities course; PART 2 - the XXXX course or equivalent, and PART 3 - Employer or Owner Project Specific Training. It is the responsibility of each employee to hold current certification and maintain certification in part 1 and Part 2. The Employer or Owner shall provide to each Employee before commencing work with PART 3 - Employer or Owner Project Specific Training. Each Employee shall be on the payroll and paid while receiving PART 3 training. As a condition of employment it is the sole responsibility of each and every employee to obtain, hold and maintain all current certification(s) in any and all legislated safety training requirements (i.e. WHMIS, Fall Arrest, etc.) that are trade specific. Supporting documentation of all legislated training must be provided by the employee to the Union prior to dispatch and to the employer upon hire and may be further requested by the employer at any time during the duration of their employment. Prior to the expiration of any certification, the Employer will notify the Employee of the pending expiration and give the Employee reasonable time to renew their certification. Further, prior to arriving at site, employees shall hold current qualification(s) for the specific tasks and equipment identified in the dispatch request. If the employee has to be trained after dispatch, all costs borne by the Employer shall be reimbursed by the Training Fund. The CODC Harassment Policy and Procedures, including the provisions regarding General Harassment and as amended from time to time shall be the minimum standard of this Agreement.

  • Safety Footwear 1. The State will provide employees in the classifications listed in Section 7 below, and employees who are currently required to wear safety footwear by Department Work Rules, an allowance of one hundred twenty dollars ($120.00) for replacement of safety footwear.

  • Prescription Safety Glasses Prescription safety glasses will be furnished by the employer. The employer retains the authority to establish reasonable rules and procedures regarding frequency of issue, replacement of damaged glasses, limits on reimbursement costs and coordination with the employer's vision plan.

  • Safety Shoes 3901 Employees who are required to wear steel-toed safety shoes will receive $200 toward the purchase and/or replacement of these shoes in the first quarter of each year. Any employee out on an authorized leave shall receive payment within thirty days of their return to paid duty. New employees who are required to wear steel- toed safety shoes will receive $200 toward the purchase of shoes in their first paycheck; for employees hired on or after December 1, he/she shall not receive an additional $200 in the following February.

  • Occupational Health & Safety Committee The parties agree to comply with the Occupational Health and Safety Act and any other federal, provincial or municipal health and safety legislation and regulations. Recognizing its responsibilities under the applicable legislation, the Employer agrees to accept as a member of its Occupational Health and Safety Committee, one representative selected or appointed by the Association from the bargaining unit. Such committee shall identify potential dangers and hazards, institute means of improving health and safety programs and recommend actions to be taken to improve conditions relating to occupational health and safety. Meetings shall be held every third month or more frequently if mutually agreed. The Committee shall maintain minutes of all meetings and make the same available for review.

  • Safety Program The Contractor shall design a specific safety program for the Work for the site(s). The Contractor shall establish and require all Subcontractors to establish reasonable safety programs. The Contractor shall also submit its standard monthly safety reports to the Owner and Design Professional. No imposition of responsibility on the Contractor for safety under this Contract shall relieve any subcontractor of its responsibility for safety of persons or property on or near the Project Site. The Contractor shall include in his plant he names of the person in charge of Safety.

  • Joint Occupational Health and Safety Committee The Employer and the Union recognize the role of the joint Occupational Health and Safety Committee in promoting a safe and healthful workplace. The parties agree that a Joint Occupational Health and Safety Committee shall be established for each Employer covered by this Collective Agreement. The Committee shall govern itself in accordance with the provisions of the Industrial Health and Safety Regulations made pursuant to the Workers’ Compensation Act. The Committee shall be as between the Employer and the Union, with equal representation, and with each party appointing its own representatives. Representatives of the Union shall be chosen by the Union membership or appointed by the Union. All minutes of the meetings of the Joint Occupational Health & Safety Committee will be recorded in a mutually agreeable format and will be sent to the Union. The Union further agrees to actively pursue with the other Health Care Unions a Joint Union Committee for the purposes of this Article. The Employer agrees to provide or cause to be provided to Employer members of the Joint Occupational Health and Safety Committee adequate training and orientation to the duties and responsibilities of committee members to allow the incumbents to fulfil those duties competently. The Union agrees to provide or cause to be provided to Union members of the Joint Occupational Health and Safety Committee adequate training and orientation to the duties and responsibilities of committee members to allow the incumbents to fulfil those duties competently. Such training and orientation shall take place within six (6) months of taking office.

Time is Money Join Law Insider Premium to draft better contracts faster.