Capacity Unit of Measure Sample Clauses

Capacity Unit of Measure. ‌ Units have a design capacity that can be captured by the Facility Widget, and in some cases, it is required to be provided by reporting programs. For example, the EIS program requires design capacity for boilers. The Capacity Unit of Measure field in the Facility Widget allows users to specify the units of measure for the value provided in the Unit Design Capacity field. The current version of the Facility Widget provides users all the valid EIS units of measure and some additional units of measure added specifically for CEDRI. Table 4 below lists the valid units of measure for unit design capacity that are supported by the Facility Widget. It also shows the mapping to the relevant codes in the EIS and their associated descriptions. For all the currently valid EIS codes (the first 8 on the list), the units of measure descriptions have been coordinated across the Facility Widget and the EIS. The remaining units of measure shown on the list map imperfectly to EIS units of measure that were retired after the 2005 inventory year. The CAER team is considering how best to resolve this discrepancy. Table 4: Unit Design Capacity Unit of Measure Mapped to Codes and Descriptions in EIS Facility Widget Capacity Unit of Measure EIS Unit Design Capacity Unit of Measure Code EIS Description 1000 POUNDS PER HOUR E3LB/HR 1000 POUNDS PER HOUR BARRELS BBL BARRELS BOILER HORSEPOWER BLRHP BOILER HORSEPOWER GALLONS GAL GALLONS HORSEPOWER HP HORSEPOWER KILOWATTS KW KILOWATTS MEGAWATTS MW MEGAWATTS MILLION BTU PER HOUR E6BTU/HR MILLION BTU PER HOUR OVEN-DRIED TONS TON/YR TONS PER YEARa THOUSAND BOARD-FEET PER YEAR (GLUE LAMINATED BEAMS) E3BDFT/YR THOUSAND BOARD-FEET PER YEARa THOUSAND CUBIC FEET PER YEAR (LVL, LSL, & PSL)b E3FT3/YR THOUSAND CUBIC FEET PER YEARa THOUSAND LINEAR FEET PER YEAR (I- JOISTS) E3FT/YR 1000 FEET PER YEARa THOUSAND SQUARE FEET PER YEAR E3FT2/YR THOUSAND SQUARE FEET PER YEARa THOUSAND SQUARE FEET PER YEAR 1/2” (FIBERBOARD) E3FT2/YR THOUSAND SQUARE FEET PER YEARa THOUSAND SQUARE FEET PER YEAR 1/8” (HARDBOARD) E3FT2/YR THOUSAND SQUARE FEET PER YEARa THOUSAND SQUARE FEET PER YEAR 3/4” (MDF & PARTICLEBOARD) E3FT2/YR THOUSAND SQUARE FEET PER YEARa THOUSAND SQUARE FEET PER YEAR 3/8” (PLYWOOD AND OSB) E3FT2/YR THOUSAND SQUARE FEET PER YEARa a As of 2/21/2019, this code has been retired from the EIS after the 2005 inventory year. b LVL = laminated veneer lumber; LSL = laminated strand lumber; PSL = parallel strand lumber.
Sample 1
AutoNDA by SimpleDocs

Related to Capacity Unit of Measure

  • Method of Measurement The harmonics emission on AC power lines generated by the vehicle representative of its type shall be measured using the method described in Annex 11. The method of measurement shall be defined by the vehicle manufacturer in accordance with the Technical Service.

  • Source of Measure Law No. 20 of 2008 Concerning Micro, Small and Medium Enterprises - Law No. 25 of 1992 Concerning Cooperatives

  • Non-Tariff Measures 1. Except as otherwise provided in this Agreement, a Party shall not adopt or maintain any prohibition or restriction on the import of any good of the other Party or on the export or sale for export of any good destined for the territory of the other Party, except in accordance with Article XI of GATT 1994.

  • Number Resources, Rate Center Areas and Routing Points 13.1 Nothing in this Agreement shall be construed to limit or otherwise adversely affect in any manner either Party’s right to employ or to request and be assigned any Central Office Codes (“NXX”) pursuant to the Central Office Code Assignment Guidelines and any relevant FCC or Commission orders, as may be amended from time to time, or to establish, by Tariff or otherwise, Rate Center Areas and Routing Points corresponding to such NXX codes.

  • Energy Resource Interconnection Service (ER Interconnection Service).

  • Sector Sub-Sector Industry Classification Level of Government Type of Obligation Description of Measure Source of Measure All sectors : : - : Central : National Treatment Senior Management and Board of Directors : National Treatment and the Senior Management and Board of Directors obligations shall not apply to any measure relating to small and medium sized domestic market enterprise2. Foreign equity is restricted to a maximum of 40% for domestic market enterprises with paid-in equity capital of less than the equivalent of USD 200,000 Note: Members of the Board of Directors or governing body of corporation or associations shall be allowed in proportion to their allowable participation or share in the capital of such enterprises. : -1987 Constitution of the Republic of the Philippines. - Foreign Investments Act of 1991 (R.A. No. 7042, as amended by R.A. No. 8179). -Presidential and Administrative Issuances. ∞ 2 The concept of a small and medium sized domestic market enterprise is an enterprise with paid in equity capital of less than the equivalent of USD 200,000.00.

  • Power Factor Design Criteria (Reactive Power A wind generating plant shall maintain a power factor within the range of 0.95 leading to 0.95 lagging, measured at the Point of Interconnection as defined in this LGIA, if the ISO’s System Reliability Impact Study shows that such a requirement is necessary to ensure safety or reliability. The power factor range standards can be met using, for example without limitation, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors if agreed to by the Connecting Transmission Owner for the Transmission District to which the wind generating plant will be interconnected, or a combination of the two. The Developer shall not disable power factor equipment while the wind plant is in operation. Wind plants shall also be able to provide sufficient dynamic voltage support in lieu of the power system stabilizer and automatic voltage regulation at the generator excitation system if the System Reliability Impact Study shows this to be required for system safety or reliability.

  • Temperature Measurement Temperature will be measured by the nearest automatic Melbourne Bureau of Meteorology Monitoring Station for example (but not limited to): Melbourne, Moorabbin, Dunns Hill, Melbourne Airport, Frankston, and Point Xxxxxx. At the commencement of each project, the onsite management and employee representatives shall agree which is to be the applicable automatic weather monitoring station.

  • Delivery Point (a) All Energy shall be Delivered hereunder by Seller to Buyer at the Delivery Point. Seller shall be responsible for the costs of delivering its Energy to the Delivery Point consistent with all standards and requirements set forth by the FERC, ISO-NE, the Interconnecting Utility and any other applicable Governmental Entity and any applicable tariff.

  • Capacity Interconnection Rights Pursuant to and subject to the applicable terms of the Tariff, the Interconnection Customer shall have Capacity Interconnection Rights at the Point(s) of Interconnection specified in this Interconnection Service Agreement in the amount of 550 MW.

Time is Money Join Law Insider Premium to draft better contracts faster.